THE EFFECT OF ELECTRIC FLOW ON DECORATIVE KROM ELECTROPLATING WITH COPPER BASE METAL TOWARD CORROSION RATE
Journal Title: Prisma Sains: Jurnal Pengkajian Ilmu dan Pembelajaran Matematika dan IPA IKIP Mataram - Year 2013, Vol 1, Issue 2
Abstract
In this study a decorative chrome electroplating process has been carried out with a copper base metal, metal electroplating is often used as a means to provide a thin layer on the surface of other metals or substrates using metal which has advantages in terms of property and corrosion resistance. In decorative chrome electroplating nickel and chrome are used as coatings, nickel and chrome are used as coatings because of their protective and decorative properties, protective means they can prevent corrosion and decorative because they look shiny so they look attractive. Copper metal is chosen because of its huge application in the community. This study aims to measure the corrosion rate in copper metal after a decorative chrome electroplating process based on electric current used during the electroplating process. This research is important because during the electroplating process a decorative chrome electoplating technique will be obtained in the form of modules, and the module will be used to train students to increase their skills. This research was conducted in the IKIP Mataram chemical laboratory with a time of one year. The process carried out in this study sequentially is to prepare an electrolyte solution used for electroplating, preparing the copper base metal to be free of oxide or rust, nickel coating and finally coating with chrome. From the coating process carried out then the results will be analyzed the corrosion rate by immersion in NaCl solution at a concentration of 36.05 grams / L for 336 hours, based on variations in electric current used during the electroplating process of 0.5; 1; 1.5; 2; and 2.5 Ampere, the corrosion rate results were 0.029; 0.013; 0.017; 0.022; and 0.012 mm / yr; while the copper metal which is not coated with a corrosion rate is 0.308 mm / yr. Thus it can be concluded that copper metal coated with nickel chrome will effectively resist the lowest rate of corrosion in the current given 2.5 Ampere.
Authors and Affiliations
Ahmadi Ahmadi, Citra Ayu Dewi
Keywords
Related Articles
- EP ID EP35969
- DOI -
- Views 393
- Downloads 0
Aplikasi Senyawa Amida Humat Sebagai Ionofor dalam Membran Elektroda Selektif Ion Ni (II)
The amide compound derived from humic acid has been applied as ionophore in ion selective electrode (ISE) measurement based on poly vinyl chloride (PVC) membrane. The carboxylic acid group of the humic acid was first m...
IMPLEMENTASI MODEL Problem Based Learning BERBANTUAN ALAT PERAGA UNTUK MENINGKATKAN AKTIVITAS DAN HASIL BELAJAR FISIKA SISWA KELAS VIII SMPN 22 MATARAM
This research is a Classroom Action Research (CAR) which aims to increase the students activities and physics learning outcomes with implementation problem based learning model assisted by props in grade VIIIA SMPN 22...
KELEMBAGAAN LAHAN KOMUNAL UNTUK PENGEMBANGAN TERNAK DI NTB (KASUS KABUPATEN SUMBAWA)
Utilization of communal land in NTB about 20% and still available 80% for the development of livestock business. Therefore, communal land has weaknesses, especially in the provision of feed in the dry season, and lack...
SECONDARY IMMUNITY RESPONSE OF MENCIT BALB / C (MUS MUSCULUS) EXPORTED BALI COW TESTISICULAR EXTRACT (BOS SONDAICUS)
Based on previous research by observing leukosit ploriferation of Balb / c mice given Balinese cow testical extract which showed significant result on observation to 72 hours after injection, while at 3 hours and 24 ho...
Pengembangan Perangkat Pembelajaran Fisika Menggunakan Model Siklus Belajar 5E untuk Melatihkan Kemampuan Berpikir Kritis
The objective of this reaserch was to produce physics learning materials with learning cycles (5E) model which focuced on the validity, practically, and effectiveness to facilitate student’s critical thinking ability i...