From Plastic Waste to Building Material: Mechanical Properties of Recycled Thermoplastic Timber
Journal Title: International Journal of Structural Glass and Advanced Materials Research - Year 2018, Vol 2, Issue 1
Abstract
The present paper illustrates the mechanical properties of a new structural product called Recycled Thermoplastic Timber (RTT), manufactured in Sardinia (Italy) and made of recycled plastics. The preliminary results of an experimental campaign aimed at assessing the main mechanical and physical properties of RTT are presented and discussed. Unreinforced and steel-reinforced thermoplastic timber profiles have been tested in laboratory and some mechanical and physical properties have been evaluated also varying the climatic conditions. Furthermore, weathering properties have been checked by testing the resistance to freezing and thawing. In light of the results since now achieved the prospect of using RTT as an eco-friendly alternative to wood and other building materials is discussed.
Authors and Affiliations
Monica Valdés, Nicoletta Trulli and Barbara De Nicolo
Keywords
Related Articles
- EP ID EP40362
- DOI 10.3844/sgamrsp.2018.55.65
- Views 216
- Downloads 0
Special Issue on Current Challenges in Materials Design
This special issue of the International Journal of Structural Glass and Advanced Materials Research contains new contributions and the extended version of some selected papers presented in the 6th International Workshop...
Knowledge Acquisition of Existing Buildings by Means of Diagnostic Surveying. Case Studies
The issue of assessing the structural safety of existing buildings involves several problems when a unique and reliable strategy of modelling and analyzing is looked for. This is mainly related to the peculiarity of each...
Preparation of Porous Silicon P-Type and Thermal Diffusivity Measurement Using Photoacoustic Technique
Porous silicon (PSi) layers were formed on a p-type Si wafer. Electrochemical method was used to prepare 36 samples with three values of current density (10, 20 and 30) mA/cm2, each involved ( 20, 40, 60 and 80) min etch...
Effect of Novel Thermo-Chemical Treatment on Bending Strength of Laminated Glass
The science of thermal and chemical treatment of glass is well documented. The Laminated Glass (LG) is usually not treated as either treated glass is used during production or lower melting temperature of interlayer does...
Comparison of Analytical and Numerical Results for the Charring Rate of the Timber-Concrete Beam
Modelling the thermal response of timber is a primary issue for the assessment of the mechanical resistance of timber structures exposed to fire. Therefore, this paper analyses various advanced calculation methods of det...