Assessment of Birjand flood plain water quality by physico-chemical parameters analysis in Iran

Journal Title: Journal of Advances in Environmental Health Research (JAEHR) - Year 2013, Vol 1, Issue 2

Abstract

We assessed the physico-chemical status of twelve surface water samples from the Birjand flood plain (east of Iran) during fall 2010. The sampling points were selected on the basis of their importance. The physico-chemical parameters such as pH, temperature (T), electrical conductivity (EC), total dissolved solids (TDS), total hardness (TH), calcium (Ca2+), magnesium (Mg2+ ), sodium (Na+), potassium (K+), chloride (Cl-), sulphtate (SO42-), bicarbonate (HCO3–), carbonate (CO32– ), nitrite (NO2–), nitrate (NO3–), dissolved oxygen (DO), biochemical oxygen demand (BOD5), and chemical oxygen demand (COD) of surface water were determined. The results showed that there were a statistical significant positive correlation between the pH and DO. pH and temperature indicated negative association with most of the parameters. Furthermore, EC showed highly significant positive association with TDS, TH, Ca2+, Na+, and Cl-. Results showed that the quality of surface water was not suitable for drinking, with references to the concentrations of EC, TDS, TH, Na+, HCO3-, and BOD5 which were more than the prescribed limits, in most sites.

Authors and Affiliations

Borhan Mansouri, Seyedeh Parvin Moussavi, Kamal Salehi, Javad Salehi, Hamid Kardan-Moghaddam, Mehri Mahmoodi, Behrooz Etebari

Keywords

Related Articles

The effect of ergonomic intervention in reducing musculoskeletal disorders by Snook table method in a steel industry

The most frequent and expensive cause category of compensable loss is manual material handling (MMH). Casting workers who handle oxygen (O2) cylinders manually are at risk for work-related musculoskeletal disorders (WMSD...

Health risk assessment of the concentration of trace elements in cosmetic products in Sanandaj, Iran

This study was conducted to determine the concentrations of Ag, Cd, Cr, Cu, Fe, Ni, Pb, and Zn in the commonly used cosmetic products such as eyeshadows, eyeliners, and skin whitening creams in markets of Sanandaj city,...

The effect of climatic parameters on air pollution in Sanandaj, Iran

Air pollution is one of the emerging environmental issues of the western cities of Iran. Daily data (2009-2012) on air pollutants in Sanandaj, Iran, were collected from the Department of Environmental Protection, Kurdist...

Assessment of ultrasound irradiation on inactivation of gram negative and positive bacteria isolated from hospital in aqueous solution

Microbial contamination of water poses a major threat to public health. With the emergence of microorganisms resistant to multiple antimicrobial agents, there is increased request for promotion of disinfection methods. S...

A survey on the performance of moving bed biofilm reactor and rapid sand filter in wastewater treatment

Moving bed biofilm reactor (MBBR) is a process in which attached growth is utilized for wastewater treatment. This process does not require sludge recycling or backwash. Activated sludge processes can be promoted to an M...

Download PDF file
  • EP ID EP415221
  • DOI 10.22102/JAEHR.2013.40131
  • Views 144
  • Downloads 0

How To Cite

Borhan Mansouri, Seyedeh Parvin Moussavi, Kamal Salehi, Javad Salehi, Hamid Kardan-Moghaddam, Mehri Mahmoodi, Behrooz Etebari (2013). Assessment of Birjand flood plain water quality by physico-chemical parameters analysis in Iran. Journal of Advances in Environmental Health Research (JAEHR), 1(2), 101-111. https://europub.co.uk/articles/-A-415221