Quantitative Characteristics of Local Strain Fields in a Top-Liner Board Sample under Uniaxial Tension
Journal Title: Lesnoy Zhurnal (Russian Forestry Journal) - Year 2020, Vol 10, Issue 1
Abstract
The paper presents the method for quantifying the distribution of local tensile (longitudinal), compressive (transverse) and shear strains in a sample of pulp and paper material. The results of its use for the sample of top-liner board when uniaxial tensile testing are provided. Applying this method, we have determined the values, the degree of heterogeneity and change patterns of local strains in inhomogeneous and anisotropic structure of the sample, depending on the total strain and the direction of fiber orientation. The method is based on constant-speed tensile testing of samples with a pre-applied dot matrix to their surface. The test is accompanied with photo fixing and recording a load-elongation curve. The coordinates and displacements of dots are determined by means of the specially designed software. The analysis of data and calculation of local deformations are performed by finite elements method (FEM) algorithms. The outcomes have shown that the local longitudinal deformations increased, transverse – decreased, and shear – had their maximum at 45° to machine direction (MD) when increasing the angle of preferential fiber orientation to MD in the board samples. The rise of the average absolute values of all components of local strains when increasing total deformation in the sample was confirmed. As it has been found, the heterogeneity of local strains, estimated through the standard deviation, rose when increasing their absolute value; the trends of changing depend on the fiber orientation direction in the sample structure.
Authors and Affiliations
A. N. Romanova, Ya. V. Kazakov, A. V. Malkov
Keywords
Related Articles
- EP ID EP683252
- DOI 10.37482/0536-1036-2020-1-180-189
- Views 535
- Downloads 0
Monitoring and Control of Paper Web Moisture
Product quality is a key indicator of the positive outcome of pulp and paper production. Moisture content is one of the main paper quality characteristics. The moisture profile across the paper web width shows possible s...
Operating Efficiency Improvement of Machinery and Equipment while Logging in Forests with Radioactive Contamination
Due to technogenic accidents at nuclear power plants, including the Chernobyl Nuclear Power Plant, part of the forests of the Russian Federation was exposed to radioactive contamination. As a result, it established the c...
Influence of Cardboard Pretreatment on the Determination of Starch Content by the Enzymatic Method
We determined the amount of starch by the enzymatic method in different samples of corrugated cardboard, including the sample produced of primary semi-finished products and corrugated cardboard made of 100 % waste paper....
Seed Propagation of Spiraea L. Species in the Botanical Garden of the Ural Federal University
Spireas (Spiraea L.) are widely used in landscaping, while the number of spirea species and cultivars used in Yekaterinburg landscaping is small. Information concerning seed germination will enable the development of eff...
Growth and Development of Pollen Tubes in Common Juniper (Juniperus communis): The Role of the Tube Cell Nucleus
In this work we have tried to explain the functional value of the tube cell nucleus and its relationship with the structures of the pollen tube on the example of juniper. Juniper pollen tubes were studied in vitro by the...