Automating the Classification of Field Leakage Current Waveforms

Journal Title: Engineering, Technology & Applied Science Research - Year 2011, Vol 1, Issue 1

Abstract

Leakage current monitoring is widely employed to investigate the performance of high voltage insulators and the development of surface activity. Field measurements offer an exact view of experienced activity and insulators’ performance, which are strongly correlated to local conditions. The required long term monitoring however, results to the accumulation of vast amounts of data. Therefore, an identification system for the classification of field leakage current waveforms rises as a necessity. In this paper, a number of 500 leakage current waveforms recorded on a composite post insulator installed at a 150 kV High Voltage Substation suffering from intense marine pollution, are investigated. The insulator was monitored for a period of 13 months. An identification system is designed based on the considered data employing Fourier analysis, wavelet multiresolution analysis and a neural network. Results show the large impact of noise in field measurements and the effectiveness of the discussed system on the considered data set.

Authors and Affiliations

D. Pylarinos, K. Siderakis, E. Pyrgioti, E. Thalassinakis, I. Vitellas

Keywords

Related Articles

Two-dimensional Numerical Estimation of Stress Intensity Factors and Crack Propagation in Linear Elastic Analysis

When the loading or the geometry of a structure is not symmetrical about the crack axis, rupture occurs in mixed mode loading and the crack does not propagate in a straight line. It is then necessary to use kinking crite...

On Polymers Nanocomposites: Electrical Treeing, Breakdown models and Related Simulations

This paper deals with polymer nanocomposites and their related breakdown mechanisms. Polymer nanocomposites seem to be a very promising alternative to conventional polymers regarding high voltage applications. Some devel...

A Demand Estimation Algorithm for Inventory Management Systems Using Censored Data

During the selling time horizon of a product category, a number of products may become unavailable sooner than others and the customers may substitute their desired product with another or leave the system without purcha...

Effect of Iron Additives on the Microstructure of Hydroxyapatite

In this article, some Fe (III) doped hydroxyapatite samples (FeHAp) were prepared using the wet chemical method. The prepared samples were characterized via the use of X-ray diffraction (XRD) and scanning electron micros...

Significant Mitigation Measures for Critical Factors of Cost Overrun in Highway Projects of Pakistan

Stakeholders of the construction industry and academia are often facing problems of cost overrun. It has been observed that many constructions of highway projects are not completed at the approved cost due to certain fac...

Download PDF file
  • EP ID EP84375
  • DOI -
  • Views 347
  • Downloads 0

How To Cite

D. Pylarinos, K. Siderakis, E. Pyrgioti, E. Thalassinakis, I. Vitellas (2011). Automating the Classification of Field Leakage Current Waveforms. Engineering, Technology & Applied Science Research, 1(1), -. https://europub.co.uk/articles/-A-84375