Analysis of Busbar Deflection in Rigid Overhead Catenary
Journal Title: Urban Mass Transit - Year 2025, Vol 28, Issue 3
Abstract
［Objective］ In metro lines utilizing ROC (rigid overhead catenary) for current collection, excessive deflection of busbars is observed under cantilever-type suspension structural condition. Therefore, it is crucial to study the deflection calculation methods and the construction installation schemes for busbars. ［Method］ ROC is modeled as a continuous beam structure, and a formula for calculating busbar mid-span deflection is derived and validated using finite element method. The causes of excessive deflection in operational lines are analyzed in relation to the busbar construction installation methods. To further improve ROC smoothness, factors influencing the busbar mid-span deflection are studied. Through increasing busbar cross-section inertia moment, directions for cross-sectional optimization are proposed. ［Result & Conclusion］ ROC should be treated as a continuous beam structure for mid-span deflection calculation. When using cantilever-type suspension structures in ROC, to ensure that the actual deflection approaches the theoretical value, multi-point supports should be implemented during the busbar installation to maintain a level and deflection-free state. Increasing the busbar cross-section elevation and selecting an appropriate cross-sectional structure can significantly reduce mid-span deflection, thereby further enhancing ROC smoothness.
Authors and Affiliations
Hongyu DAI, Chao FENG, Zhengchao SHEN
Keywords
Related Articles
- EP ID EP760123
- DOI 10.16037/j.1007-869x.2025.03.003
- Views 32
- Downloads 0
Automatic Train Operation System Based on Vehicle Deep Integration
Objective Conventional ATO (automatic train operation) systems lack a direct, real-time, and bidirectional data exchange with the vehicle traction/braking systems. In the vehicle control process, information on the vehic...
Quantitative Ultrasonic Testing and Evaluation of Laser Welds for Stainless Steel Carbody of Rail Transit Vehicles
［Objective］ During the laser welding process of stainless steel carbody of rail transit vehicles, energy transfer from the laser beam to the material is dynamically variable. To ensure the quality of laser welding, non...
Feasibility Analysis of Permanent Magnet Traction Technology on Nanjing Metro Line 9 Trains
[Objective] Under the same power configuration, the cost of a permanent magnet synchronous traction system is higher than that of an asynchronous traction system. However, the former can effectively reduce the operationa...
Construction of Urban Rail Transit Line Spatial Digital Base Using 3D Laser Point Cloud Technology
Objective In order to facilitate the digital transformation and high-quality development of Shanghai rail transit, it is imperative to construct a digital twin model and create a unified, authoritative, and precise spati...
Passing Performance of Inverted T-shaped Frog Turnouts for Suspended Monorail Vehicles
[Objective] The suspended monorail transportation system holds promising prospects, yet researches on the dynamics performance of vehicle passing through turnouts remain relatively scarce, requiring comparison for furthe...