Assessment the Effects of Temperature and Humidity Control in Greenhouse Cucumber Productions in Jiroft and Kahnooj Region
Journal Title: Journal of Agricultural Machinery - Year 2012, Vol 2, Issue 1
Abstract
Temperature and humidity are two important parameters affecting the quality and quantity of greenhouse products so two double greenhouses were manufactured in 3.5, 40 and 11 m in height, length and width respectively in agricultural research center of jiroft and kahnooj to study these effects. Both of greenhouses are similar in materials, final height, gutter height, covering and field operation but in one of them one heating system, two ventilation fans and one wooden pad were assembled and temperature and humidity besides yield were registered in both of them. The results showed that temperature changing trend inside and outside of the unheated greenhouse were in same phase and this isn't suitable in cold night so the greenhouse with heating system had more yield and picking cucumber fruit numbers than another. Therefore it is necessary to be heated by artificial systems. Because of rapid relative humidity changing in outside of greenhouse in the end of the season, the efficiency of fan and pads cooling system is so low then using of evaporating cooling systems such as fans and pad wasn't proposed and recommend to optimize the temperature by ventilation and shading the greenhouse and in hot days production will be cut.
Authors and Affiliations
D. Momeni,M. H. Rahmati,
Keywords
Related Articles
- EP ID EP717662
- DOI -
- Views 36
- Downloads 0
Technical Evaluation of Three Methods of Manual, Semi-mechanized, and Mechanized Peanut Harvesting in Moghan
IntroductionThe harvesting stage is the most crucial phase in peanut production. In other words, one of the critical stages in producing this product is the harvest stage. Although it has its difficulties, this stage is...
Comparison of the Effects of No Tillage, Minimum Tillage and Conventional Tillage on Dry Land Wheat Yield in Pebbly Field in Tropical Region
The current study was conducted to compare different tillage methods on wheat yield in pebbly dry land areas done within three years (2006-2008) in north Khouzestan (Baghmalek city) in randomized block design with five t...
Optimization of hydrodynamic cavitations reactor efficiency for biodiesel production by response surface methods (Case study: Sunflower oil)
Introduction Biofuels are considered as one of the largest sources of renewable fuels or replacement of fossil fuels. Combustion of plant-based fuels is the indirect use of solar energy. Biofuels significantly have less...
Ventilation and Cooling Modeling and Lyout of Fans, Pads and Vents of an Octagonal Greenhouse
IntroductionGreenhouse technology is a ï¬exible solution for sustainable year-round cultivation of many horticulture products, particularly in regions with adverse climate conditions or limited water and resources. Gree...
Modeling and Optimizing of the Energy Consumption of Moldboard Plow using Response Surface Methodology (RSM)
Introduction Tillage as a preliminary step for agricultural production consumes large amounts of energy. Regarding the energy crisis and the greenhouse gas emissions caused by the indiscriminate use of fossil fuels, many...