Effect of the tangent of the cutting blade on the performance of machining
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2017, Vol 80, Issue 2
Abstract
The kinematic schemes of turning with a blade tool with tangential displacement of the cutting blade are considered. Methods are shown for reducing the tension of the cutting process due to interruption and periodization of the process and tangential movement of the blade along the contact interaction zone. The effect of the kinematic coefficient and cutting conditions on the dynamic characteristics of the process and the properties of the surfaces being formed are studied. It is shown that the rotation of the cutting blade provides a reduction in temperature in the cutting zone, an increase in the cutting speed by 2–5 times, and the change in the mechanisms of wear of the tool blade during the transition from cutting to the self-rotating blade allows to improve its technological resistance 3–50 times.
Authors and Affiliations
V. Ya. Lebedev
Keywords
Related Articles
- EP ID EP261067
- DOI -
- Views 101
- Downloads 0
Stiffness determination of the controlled wheel module of a two-axle vehicle
The conditions of a secure loss of stability of a two-axle wheel vehicle with absolutely hard steering have been found before. The analytically derived conditions of a secure stability loss in case of torsional stiffness...
Evaluation and improvement of town-coupled quality of vehicle based on the application target function connecting electrical and mechanical characteristics
Theoretical studies on the problem of increasing the traction force of a locomotive are analyzed and summarized. The complex nature of the process of interaction between the wheel pair and the track gauge, the changes in...
Determination of rational conditions of application of rock layered milling combines on iron ore pits
The method of determining the effective use of milling type surface miners for the use of non-blasting technology of layer milling of rocks during open exploration of iron ore deposits has been improved. The non-blasting...
The study of the aerodynamic performance of a train using a physical simulation method
The paper analyzes the topicality of the research topic, identifies goals, objectives, subject and object of research. The analysis of known studies related to the study of the characteristics of the formation of the air...
Design and investigation of electronic unit of a pyrometer for measuring flux fadiation of solid particles in a two-phase flow
The work offers the improvement of oxygen monitoring instrument of a gas torch with the use of a simple tool base which does not demand a high level of qualification of operator. An electronic block of pyrometer was deve...