EFFECT OF TITANIA ON AL-CU-MG ALLOY ON DRY SLIDING WEAR BEHAVIOR USING – TAGUCHI TECHNIQUE.
Journal Title: International Journal of Advances in Scientific Research and Engineering - Year 2015, Vol 1, Issue 1
Abstract
In the present study, Al-Cu-Mg alloy reinforced with 4 Wt % of Titania was prepared using stir casting method. This investigation is carried out to understand tribological properties of as cast Aluminium alloy and 4wt% Titania reinforced metal matrix composite. Dry sliding wear test was conducted to understand the tribological behaviors of samples. In the present study, the experiments were conducted as per the Taguchi design of experiment. The wear parameters chosen for the experiment were: Sliding speed, Load and sliding distance. Each parameter was assigned three levels. The experiment consists of 27 tests according to L 27 orthogonal array. The analysis of variance was used to investigate the significant factors that affect the dry sliding wear and to know the effect of Titania on Aluminum alloy. The result shows that Titania particles reinforced composite exhibited reduced wear rate than the unreinforced alloy.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP216663
- DOI -
- Views 67
- Downloads 0
FUTURE INTERNET RESEARCH
The number of users connected to the Internet has grown exponentially. New applications have led to the convergence of voice and data networks. The capacity of the original Internet is rapidly becoming inadequate to hand...
Comparative Study of Multi-Storey RC Building Having Flat Slab with and without Shear Wall with Conventional Frame Structure Subjected To Earthquake
In present era, there has been a considerable increase in the number of tall buildings. In construction industry a conventional RC building were commonly adopted for constructing residential, commercial and office buildi...
INTERNET OF THINGS IN THE CHEMICAL INDUSTRY
The Internet of things (IoT) is emerging as a disruptive technology of the 21st century-an extension of the Internet revolution which has made a tremendous impact on social and business environments. Unfortunately, not e...
DESIGN AND PROPOSAL OF SOLAR PHOTOVOLTAIC POWER PLANT FOR MEDIUM SCALE INDUSTRY
Energy is one of the major inputs for economic development of any country. In the case of developing countries like us, the energy sector assumes critical importance in view of the ever-increasing energy needs, widening...
Effect of Graphene and Silica Fillers on Mechanical Properties of Polymer Nano Composites
In the recent years Polymer Nano composites have become promising materials in all engineering materials for transportation, automotive, and biomedical applications. This paper presents various combinations of Nano fille...