Effect of turbo charger system on engine fuel consumption and tractor power and traction (ITM475, ITM485 and ITM800)
Journal Title: Journal of Agricultural Machinery - Year 2015, Vol 5, Issue 2
Abstract
Introduction: Tractors are considered as the main power generators in mechanized agriculture. Hence, the experts and engineers in tractor manufacturing of the country, are required to focus on developing and designing new features in tractor manufacturing. This must be, of course, paralleled with the economic aspects. Achieving this goal, Iran Tractor Manufactories Co., (ITMCO) has designed and developed tractors equipped with turbochargers. This has been performed on ITM800 & ITM485 models, according to world standards. The turbocharger system, with harnessing of lost energy in engine output fumes, compresses the air entering the engine and more air enters the cylinder. This will cause the engine to burn fuel more efficiently and thus produce more power. Materials and Methods: This study has been carried out on ITM485 & ITM800 tractors (with turbocharger system) and ITM285 & ITM475 tractors (without turbocharger system) to assure the improvement of engine performance and compare them employing OECD world standards. Experiments were performed in the concrete runway of Tabriz Tractor Manufacturing Company. For experiments, a dynamometer was used to measure the traction force between two tractors, a measuring unit for fuel, a thermometer unit and a timer to measure the quantities of fuel consumption, drawbar force and power. For drawbar traction test, each of the tested tractors pulled the rear tractor in different gears and the dynamometer between these 2 tractors recorded the tractors traction force by data loggers. To measure tractors fuel consumption, a measuring unit of fuel (VDO - EDM 1404) was used that calculated the flow rate in the path of fuel from the fuel tank to the engine and the return path from the engine to the fuel tank and showed the quantity of fuel consumption in liters per hour digitally. Results and Discussion: In comparison of traction power and force of tractors with turbochargers and without turbochargers in different gears, the results of variance analysis showed that the effect of tractor was significant. Traction power and force at tractors with turbochargers ITM485 and ITM800 and without turbocharger ITM475 have a significant difference in the level of one percent. Tukey post hoc test results also indicate that traction power and force in tractors with turbochargers ITM485 and ITM800 are significantly more than the tractor without turbocharger ITM475. The gear effect is also significant. Traction power and force in different gears have significant difference at the probability of one percent. Tukey post hoc test results indicate that power quantity is highest in the gears: (1+H, 2*H, 1*H, 3+L) and minimum in the gears: (1*L, 1+L, 2*L), (* Turtle and + Rabbit). But Tukey post hoc test results indicate that traction force quantity is highest in the gears: (1*L, 2*L, 1+L) and minimum in the gears: (2*H, 1+H). In the comparison of specific fuel consumption of tractors with turbochargers and without turbochargers in different gears, the results of variance analysis showed that the effect of tractor was significant. The amount of specific fuel consumption at tractors with turbochargers ITM485 and ITM800 and without turbocharger ITM475 has a significant difference in the level of one percent. Tukey post hoc test results also indicate that specific fuel consumption quantity in tractors with turbochargers ITM485 and ITM800 in the level of one percent is significantly less than the tractor without turbocharger ITM475. The gear effect is also significant. The specific fuel consumption quantity in different gears has significant difference at the probability of one percent. Tukey post hoc test results indicate that specific fuel consumption quantity is highest in the gears: (1*L, 1+L, 2*L) and minimum in the gears: (1+H, 2*H, 1*H). Conclusions: The tests were performed on tractor drawbar traction. Results of variance analysis in this experiment on a concrete surface, indicated that the calculated traction power and force of ITM485 and ITM800 tractors (with turbocharger system) were higher than the ITM475 & ITM285 tractors (without turbocharger) and this difference was significant at the one percent level of probability. Meanwhile specific fuel consumption in the ITM485 and ITM800 tractors (with turbocharger system) was lower than that of the ITM475 & ITM285 tractors (without turbocharger) and this difference was significant at the one percent level of probability. This will lead to significant savings in fuel consumption.
Authors and Affiliations
Kh. PashaiHulasu,B. Mohammadi Alasti,M. A. Haddad Derafshi,M. Abbasgholipour,
Keywords
Related Articles
- EP ID EP717758
- DOI -
- Views 36
- Downloads 0
Numerical Simulation of the Performance and Emission of a Diesel Engine with Diesel-biodiesel Mixture
IntroductionIncreasing industrialization, growing energy demand, limited reserves of fossil fuels, and increasing environmental pollution have jointly necessitated for exploration of a substitute for conventional liquid...
Design, Construction and Evaluation of a Row Crop Thinning Machine
Equipment availability is necessary in the development of Agriculture mechanization. Crop thinning is one of the most important stages in row crop production which is laborious and costly. The objective of this project i...
Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils
Introduction Essences or essential oils are aromatic compounds that are found in different organs of the plants. Essences can be classified into three groups of natural, synthetic and natural like. Most of the methods th...
The selection of best tillage implements in terms of energy use efficiency using simple additive weighting methodology
Introduction Main part of energy consumption in agricultural mechanization is tillage operations therefore optimization of energy consumption in tillage operation is very important. A management method for system to opti...
Evaluation of Different Methods of Sugarcane Hilling Up in Two Soil Textures and Three Forward Speeds
Introduction Sugarcane cultivation in Khuzestan province is in the form of planting in-furrow. Due to the fact that in a machine harvesting, the reaper is not able to fully harvest the straw in the furrow, in the plantin...