Evaluation of hydrophilic properties of acrylonitrile/acrylic acid copolymer films dendrigrafted with citric acid
Journal Title: Polyolefins Journal - Year 2017, Vol 4, Issue 2
Abstract
The present study investigates the hydrophilic properties of acrylonitrile/acrylic acid P(AN/AA) copolymer films with various acrylic acid (AA) contents dendrigrafted with citric acid from zero to fourth generation numbers. It was found that the hydrophilicity of the dendrigrafted films was a complicated phenomenon. Various parameters such as intermolecular hydrogen bonding, roughness and active functional groups affected the wettability of the film samples measured via static contact angle. The results revealed that the hydrophilicity decreased with increasing the generation number owing to the steric hindrance of terminal groups. However, active functional group increased by rising generation numbers which was confirmed using zeta potential measurement. Furthermore, the percentage conversion of the reactions showed a reduction with increasing generation number and AA content which was in agreement with the reduction in wettability corresponding to the higher contact angle. On the other hand, zeta potential as well as roughness of the films increased with successive generations.
Authors and Affiliations
Somaye Akbari, Niloofar Eslahi, Mohammad Haghighat Kish
Keywords
Related Articles
- EP ID EP283176
- DOI 10.22063/POJ.2017.1436
- Views 145
- Downloads 0
Compatibilization of polycarbonate/poly (ethyleneterephthalate) blends by addition of their transesterifcation product
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specifed mixing...
A theoretical reasoning on why coordination catalysts supported on mesoporous supports can produce HDPE crystalline nanofibers but not iPP crystalline nanofibers
Since 1999, when Takuzo Aida proposed the preparation of high density polyethylene (HDPE) crystalline nanofibers through polymerization of ethylene by a Cp2TiCl2/MCM-41 catalyst, many researchers have published various p...
Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties
The aim of the present work is to enhance the antifouling properties of polypropylene (PP) membrane based on hydrophilicity improvement. Different contents of neat and modifed nanodiamond (0.25, 0.50, 0.75 and 1.00 wt.%)...
Synthesis and identifcation of polystyrene via conventional and controlled radical polymerization methods: Effect of temperature, initiator and transfer agent on molecular weight and reaction rate
Polystyrene (PSt) has been known as one of the important polymers with a wide range of applications. Ability to synthesize PSt with different but predictable molecular weights for various applications is very important i...
Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization
Several types of hybrid catalysts are made through mixing of 4th generation Ziegler-Natta (ZN) and (2-PhInd)2ZrCl2 metallocene catalysts using triethylaluminum (TEA) as coupling agent. Response surface methodology (RSM)...