Evaluation of Point-of-Use Drinking Water Treatment Systems Efficiency in Reducing or Removing Physicochemical Parameters and Heavy Metals
Journal Title: Journal of Environmental Health and Sustainable Development - Year 2019, Vol 4, Issue 1
Abstract
Introduction: Nowadays, many people have bought and installed home water treatment devices (point-of-use drinking water treatment systems), as an essential measure, to improve their health. Materials and Methods: This cross-sectional study was conducted to evaluate the parameters of drinking water of Rafsanjan city and home water treatment device in summer 2017. Water samples at the inlet and outlet of the device with 15 day intervals for three months (approximately 48 samples, summer) were collected. Then, the concentration of heavy metals, total hardness, EC, sodium and nitrate were measured in inlet and outlet of treatment devices. All data were statistically analyzed by SPSS software version 18. Results: The results showed that in the inlet water, the EC and pH values were in the standard ranges. The concentrations of arsenic was higher than the permissible limits and other parameters including total hardness, calcium, sodium, magnesium, nitrate, copper, zinc and lead were lower than the standard limits. The highest reduction efficiency was obtained for copper, zinc and arsenic respectively, and the lowest reduction efficiency was reported for nitrate and calcium. Conclusion: Therefore, it can be concluded the devices could reduce the concentrations of the parameters under the standard limits. Due to the relationship between heart disease and light water, it is suggested that, in view of the high arsenic content in Rafsanjan water, filters at the inlet municipal water can be used to absorb heavy metals, especially arsenic.
Authors and Affiliations
Raziyeh Pourjamali, Elham Khalili Sadrabad, Sayed Aliasghar Hashemi, Hosein Shekofteh, Mehdi Mokhtari, Ali Heydari, Fateme Akrami Mohajeri
Keywords
Related Articles
- EP ID EP472908
- DOI 10.18502/jehsd.v4i1.490
- Views 126
- Downloads 0
The Effect of Exposure to Respirable Dust on Blood Parameters of Workers in a Tile and Ceramic Industryin, Yazd
Introduction: The relationship between elevated level of gas and particulate pollutants with increased mortality resulting from cardiovascular and respiratory diseases has been presented in epidemiological studies. Altho...
"Internet of Things": An Emerging Real-Time Technology for Environmental Health Monitoring
With the development of human society, environmental issue has become an important manifestation of civilization and life quality. Environmental monitoring has been always related to human understanding of the nature. Th...
Performance Evaluation of Point-Of-Use Drinking Water Treatment Units in Removal of Heavy Metals and Dissolved Solids from Drinking Water Supply in Tabriz
Introduction: Application of point-of-use (POU) drinking water treatment units is expanding across the world due to the increased concerns about the adverse health effects of water pollution. The main treatment systems o...
Surveying Denitrification Efficacy in Up-Flow Packed Bed Bioreactor Operated under Heterotrophic Condition Using Autotrophic Bacteria
Introduction: The biological denitrification process is an interesting cost-effective technique to remove nitrate from water supplies. Acetic acid can be used as a carbon source in this process, but its consumption rate...
The Most Important Methods for Reduction or Detoxification of Aflatoxins in Food and Feed Matrices
Aflatoxins are the most important mycotoxins in many foods. About 20 different types of aflatoxins have been identified and the most important species include AFB1, AFB2, AFM1, AFG1, and AFG2 1. Information achieved from...