Removal of Acid Orange 7 dye from wastewater using combination of ultraviolet radiation, ultrasonic method, and MgO nanoparticles
Journal Title: Environmental Health Engineering and Management Journal - Year 2019, Vol 6, Issue 3
Abstract
Background: Industrial dyes are toxic and carcinogenic, therefore, they should be removed from wastewater. The aim of this study was to investigate the removal of acid orange 7 Dye from wastewater using ultraviolet (UV) radiation, MgO nanoparticles, ultrasonic method alone and in combination with each other. Methods: The effects of some factors such as temperature, pH, hydraulic retention time (HRT), UV power, and concentration of MgO nanoparticles on the removal of Acid Orange 7 dye from synthetic wastewater using different methods were investigated. Also, adsorption isotherms for MgO nanoparticles and kinetics for UV radiation were investigated. Results: The optimum HRT was 55 minutes while the temperature was not effective in dye removal using the ultrasonic method. Under optimum conditions for UV irradiation method (HRT = 70 minutes, UV power = 170 mW/cm2, and temperature = 10˚C), 58% of the dye was removed. However, under optimum conditions for MgO nanoparticles method (HRT = 15 minutes, temperature = 20˚C, and ratio of MgO nanoparticles to the initial dye concentration = 67.2), 82% of the dye was removed. By combining these methods, the dye removal efficiency was significantly increased. The combination of ultrasonic method and MgO nanoparticles had no significant effect on increasing the dye removal efficiency from wastewater. It was revealed that dye removal using UV radiation can be described by the first-order kinetics. Conclusion: According to the results, UV radiation has a synergistic effect on the dye adsorption process by MgO nanoparticles. Therefore, the combination of these methods can be effective for the removal of dye from wastewater.
Authors and Affiliations
Amirreza Talaiekhozani , Abbas Heydari Chaleshtori , Farhad Banisharif , Zeinab Eskandari , Mohammad Nasiri , Farham Aminsharei , Junboum Park , Shahabaldin Rezania , Maryam Bazrafshan
Keywords
Related Articles
- EP ID EP675758
- DOI DOI: 10.15171/EHEM.2019.18
- Views 233
- Downloads 0
Health and safety hazards identification and risk assessment in the swimming pools using combined HAZID and ALARP
Background: Swimming pools are recreation and sport sites where the lack of safety and health can have severe adverse effect on public health. This study aimed to identify and assess health and safety risks using HAZID...
Photocatalytic removal of Malachite green dye from aqueous solutions by nano-composites containing titanium dioxide: A systematic review
Background: Malachite green (MG) is widely used as a fungicide, Bactericide parasiticide in the aquaculture industry, as a food additive, medical disinfectant, and also, as a dye for materials such as silk, leather, pape...
A detailed study of the physicochemical parameters of the solid waste dumping grounds adjoining densely populated areas: A case study in India
Background: Industrialization and urbanization in developing countries are the major issues responsible for producing colossal amounts of waste (about 51.35 tons per day). Midnapore municipality as a class-I town (> 10...
Health risk assessment of heavy metal exposure from indoor dust: A case study of residential buildings in Isfahan, Iran
Background: Heavy metals (HMs) are toxic pollutants whose concentrations in confined spaces might cause severe health impacts. This study aimed to determine the concentration and health risk of As, Cd, Co, Pb, Mn, Ni,...
Sonochemical degradation of azithromycin in aqueous solution
Background: The presence of pharmaceutical substances and their residual in water resources is an important environmental concern. Azithromycin, an antibiotic that is used for the treatment of infectious diseases, is a p...