Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method
Journal Title: Polyolefins Journal - Year 2017, Vol 4, Issue 2
Abstract
In this study, neat HDPE and HDPE/PE-g-MA/EVA blend membranes were fabricated via thermally induced phase separation (TIPS) method and their fouling behaviors were examined using filtration of BSA protein. Membranes were characterized using FESEM, AFM, ATR-FTIR analyses and porosity measurement. Fouling behavior of membranes was analyzed using the resistance-in-series (RIS), classic and combined pore blocking models. The results of RIS model revealed that the magnitude of inherent, reversible and irreversible resistances decreased from 0.611 ×1013m-1 and ,1.578 ×1013m-1 and 0.525 ×1013m-1 for the neat membrane to 0.237 ×1013m-1, 0.789 ×1013m-1 and 0.154×1013m-1 for the blend membrane, respectively. None of the classical Hermia’s models were able to accurately predict fouling during the entire filtration run. The results obtained from the combined pore blocking model indicated that the combined cake formation-intermediate blocking model provided good prediction of fouling mechanism for both the membranes. However, comparison between fitted parameters showed that much greater fouling occurred for pure HDPE membrane. The key reasons for such different fouling behaviors were mainly attributed to the difference in hydrophobicity as well as the distribution of pore size on the surface of the pure and blend membranes.
Authors and Affiliations
Setareh Heidari, Yoones Jafarzadeh, Mahdi Seyfollahi Samarin, Reza Yegani
Keywords
Related Articles
- EP ID EP283179
- DOI 10.22063/POJ.2017.1466
- Views 126
- Downloads 0
Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models
The loss of energy, especially in industrial and residential buildings is one of the main reasons of increased energy consumption. Improving the thermal insulation properties of materials is a fundamental method for redu...
Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method
In this study, neat HDPE and HDPE/PE-g-MA/EVA blend membranes were fabricated via thermally induced phase separation (TIPS) method and their fouling behaviors were examined using filtration of BSA protein. Membranes were...
hermal behavior of ethylene/1-octene copolymer fractions at high temperatures: Effect of hexyl branch content
In this work, the effect of hexyl branch content on thermal behavior of a fractionated ethylene/1-octene copolymer with emphasis on high temperatures was investigated. The ethylene/1-octene copolymer was carefully fracti...
Synthesis of high molecular weight polyethylene using FI catalyst
A FI Zr-based catalyst of bis[N-(3,5-dicumylsalicylidene)-2′,6′diisopropylanilinato]zirconium(IV) dichloride was prepared and used for polymerization of ethylene. The effects of reaction conditions on the polymerization...
Amoco CD commercial polypropylene catalyst tailor-made for the Amoco-Chisso gas phase process
The commercial profile of the Amoco CD MgCl2 supported polypropylene catalyst is presented. The development, the unique method of preparation/production, with emphasis on particle morphology, and the parameters affecting...