THE INFLUENCE OF TEMPERATURE ON COEFFICIENT OF MAGNETIC SUSCEPTIBILITY χ OF FERRO-OILS WITH DIFFERENT CONCENTRATIONS OF MAGNETIC PARTICLES
Journal Title: Tribologia - Year 2016, Vol 269, Issue 5
Abstract
In this paper, the authors presented research concerning the determination of the relation between magnetic susceptibility coefficient χ of ferro-oil and temperature changes. The tests were conducted on the ferro-oil samples of various, chosen magnetic particles concentrations: 1%, 2%, 4%, 6%, and 8%. In accordance with the conclusions resulting from Curie-Weiss equation, the values of magnetic susceptibility χ depend on the physicochemical features of considered material, including the magnitude and amount (concentration) of magnetic particles and physical properties of its environment, i.e. the kind and direction of magnetic field and also on the operating temperature, which is the main subject of conducted tests in this paper. This article presents the structure of the bench used for experimental designation of magnetic susceptibility coefficient in relation to temperature changes of tested ferro-oil. Moreover, the authors demonstrated a method enabling the determination of these values from obtained measurement data, conducted the analysis of obtained results and presented the conclusions
Authors and Affiliations
Marcin FRYCZ
Keywords
Related Articles
- EP ID EP186595
- DOI -
- Views 65
- Downloads 0
LOW-TEMPERATURE TRIBOLOGICAL CHARACTERISTICS OF METAL-POLYMER COMPOSITES
The paper presents low-temperature tribological characteristics of the metal- -polymer composites intended for regeneration of the sliding machine elements. Three series of the composites were prepared, employing solid-s...
A new method of measuring the operating parameters of slide journal bearings by using acoustic emission
This paper determines the new results of experimental research due to the hydrodynamic friction forces identification using acoustic emission method The results are connected with the dependences between hydrodynamic f...
IMPACT OF ADHESION AND VISCOSITY FORCES ON FRICTION VARIATIONS IN BIO-TRIBOLOGICAL SYSTEMS
The classical theory of lubrication holds that the lubricant dynamic viscosity increments cause the increments of hydrodynamic pressure, as well as friction forces and wear. In the case of high values of hydrodynamic pre...
WPŁYW DODATKÓW NA STABILNOŚĆ OKSYDACYJNĄ I TRWAŁOŚĆ ZMĘCZENIOWĄ SMAROWANYCH WĘZŁÓW TARCIA
Celem badań było określenie wpływu różnych dodatków, a mianowicie: grafitu, nanostruktur węgla i polimeru PTFE na właściwości smarne w odniesieniu do smaru na bazie oleju parafinowego bez dodatku. Oceniono synergię dział...
Charakterystyka rowkowanej warstwy wierzchniej mikrołożysk komputera
W niniejszej pracy został przedstawiony pomiar własności materiału warstwy wierzchniej czopa i panewki nieeksploatowanych współpracujących powierzchni mikrołożyska występujących w komputerowym wentylatorze Kama Flow SP...