Determination of Load for Quasi-static Calculations of Railway Track Stress-strain State
Journal Title: Acta Technica Jaurinensis - Year 2016, Vol 9, Issue 1
Abstract
When calculating the railway track stress-strain state one usually assumes that total strains are brought immediately from applied load and the process dynamics is taken into account by the respective levels of design force. The dynamic component of the design force depends on various factors that are not always taken into account to the full. The analytical analysis of the calculation methods and the experiment testing data resulted in the following recommendations: for freight trains, especially in the conditions of soft rail support, it is advisable to take into account the effect of adjacent wheels; for modern passenger cars there is no significant load dependence on speed, and the main factor of dynamic component is the track fluctuations.
Authors and Affiliations
D. Kurhan
Keywords
Related Articles
- EP ID EP630740
- DOI 10.14513/actatechjaur.v9.n1.400
- Views 196
- Downloads 0
FEM Modelling Possibilities of Glued Insulated Rail Joints for CWR Tracks
In this paper the authors detail the possibilities of modelling of finite element method (FEM) of glued insulated rail joints which are applied in railway tracks with continuously welded rails (CWR). A lot of laboratory...
Thermomechanical Analysis of Vibrations of Silent Block
Vehicle components made of rubber or rubber like polymers usually exhibit large deformations.Cyclic deformations may induce increasing in temperature in elastic materials. In this paper after the summary of the basic phy...
Design Considerations by the Optimisation of PMS Motors
The determination of the targets, the input, implicit and design parameter is very important part in the design optimisation of the permanent magnetic synchronous motors for electric vehicles. We had to define the connec...
Investigation of Long Cellulose Fibre Reinforced and Injection Moulded Poly(lactic acid) Biocomposites
We investigated injection moulded composites of a polylactic acid matrix reinforced with cellulose fibers. We produced long fiber reinforced granules (preforms) with the use of two technologies: extrusion coating and fil...
Comparative Analysis of Axlebox Accelerations in Correlation with Track Geometry Irregularities
Stochastic track irregularities influence additional dynamic forces developed in the vehicle-track interaction that lead to faster deterioration of track. For economical track maintenance it is important to understand th...