A CASE STUDY ON DEFECTS IN ROTARY MACHINE AND REMOVE ITS FAULTS USING ANN
Journal Title: International Journal of Electrical, Electronics and Mechanical Fundamentals (www.ijeemf.com) - Year 2012, Vol 3, Issue 1
Abstract
In this paper, authors discuss about the rotary machine and the four main problems in the machines. The problems are Defect electric, Mechanical looseness, Vertical unbalance + Mechanical looseness, Horizontal unbalance. The solution to these problems is done by artificial neural network techniques. The solution to the problem is nearly 100% and these things are shown by parameters in table and other things are explained in this paper. The latest Matlab software is used to solve the mentioned problems.
Authors and Affiliations
Chirag Singh , Satish Kumar , Narinder Kaushik
Keywords
Related Articles
- EP ID EP86976
- DOI -
- Views 187
- Downloads 0
ESTIMATION OF MASS DISTRIBUTION IN ANNULAR COMBUSTOR OF GAS TURBINE IN COLD FLOW USING CFD TOOLS
Since the gas turbine is an air-breathing engine, its performance is changed by anything that affects the density and/or mass flow of the air intake to the compressor. Ambient weather conditions are the most obvious chan...
ANALYSIS OF REACTIVE ROUTING PROTOCOLS FOR MOBILE AD-HOC NETWORKS
A MANET is an autonomous collection of mobile users (nodes) that communicate over relatively bandwidth-constrained wireless links. The infrastructure less and the dynamic nature of these networks demands new set of netwo...
Simulation of 8 × 10 GB/s Optical WDM Communication System at Different Distance
In this paper, Eight WDM channels in the frequency region 192.90 THz - 193.425 THz, at fixed channel spacing of 75GHz, are modulated at 10 GB/s and transmitted over more than 2000 km of SMF using loop. Each time value of...
THE PERFORMANCE OF DATA TRANSMISSION ON CLOUD TECHNOLOGY
This paper presents the necessary utility on network in order to implement the performance of Data Transmission on Cloud. To improve those data transmission we have built Data Storages located at different countries over...
TO ANALYZE THE PERMISSIBLE STRENGTH, STRESS AND THE SAFETY FACTOR OF STEEL
In this paper, the welding processes, permission stress are explained. Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing coalescence. This is often done by...