A Comprehensive Review on Cutting Tool Material in Hard Turning Performance

Journal Title: Engineering and Technology Journal - Year 2024, Vol 9, Issue 04

Abstract

The work presents a comprehensive review on the influences of cutting tool material on the efficiency of hard turning process. Major trends in tool use and coating innovations are specified. The results of the hard turning process are evaluated through a number of main parameters such as surface roughness, cutting force, cutting heat, and wear mechanism. These results show that high cutting forces and cutting temperatures are still the huge challenges in choosing cutting tool materials in hard turning. This also limits the applicability of these materials and increases tooling costs due to the need to move towards using cutting tools with higher grades and hardness. The analysis results also point out the necessity of using appropriate cooling lubrication technology to support the hard turning process, helping to improve tool usage efficiency and the effectiveness of the hard turning process.

Authors and Affiliations

Nguyen Phu Son

Keywords

Related Articles

RELIABILITY ANALYSIS OF 20 KV MEDIUM VOLTAGE AIR LINE DISTRIBUTION SYSTEM AT SEMANGGA SWITCH SUBSTATION IN MERAUKE REGENCY

The breakdown of electrical energy can be caused by the unwanted failures that occur in the electric power system, especially in the distribution system, and have an impact on service continuity which can be a permanent...

PROBLEM SOLVING AND REHABILITATION OF THE SPELEOLOGICAL OBJECT OF LARGER DIMENSIONS WHICH APPEARED DURING THE EXCAVATION OF THE "POČITELJ" TUNNEL

The "Počitelj" tunnel was built as part of the section of the highway Mostar North - the border with the Republic of Croatia on the corridor Vc, the section Počitelj - Bijača, the subsection Počitelj - Zvirovići with a l...

IMAGE ENHANCEMENT OF HUMAN FINGERPRINTS USING FEATURE EXTRACTION & MATCHING TECHNIQUES

Biometrics, which mentions to identification based on physical or behavioural characteristics, is being progressively adopted to provide positive identification with a high degree of confidence. Among all biometric techn...

AWARENESS AND USAGE OF E-LEARNING MATERIALS AMONG SAUDI UNIVERSITY STUDENTS

An investigation was conducted on the usage of e-learning tools among a sample of 350 Saudi university students, and their experience of usability. Data was collected from a nationwide survey using an instrument containi...

CFD ANALYSIS OF VARIOUS HEIGHT OF PIN FIN HEAT SINK IN INLINE ARRANGEMENT

The electronic device became the part in a daily life, hence it is our responsibility to increase the life of such electronic devices by providing efficient cooling to the heat producing systems, else it causes permanent...

Download PDF file
  • EP ID EP734394
  • DOI 10.47191/etj/v9i04.16
  • Views 56
  • Downloads 0

How To Cite

Nguyen Phu Son (2024). A Comprehensive Review on Cutting Tool Material in Hard Turning Performance. Engineering and Technology Journal, 9(04), -. https://europub.co.uk/articles/-A-734394