A Comprehensive Static and Modal Analysis of ”5R” Kinematic Chains Using Virtual Techniques
Journal Title: RECENT - Year 2009, Vol 10, Issue 27
Abstract
An important characteristic for the field of industrial robotics is the positioning precision of end effectors. Due to the progress of the computer technologies and control systems, the accuracy has significantly improved in the last years. Still, there is a continuous need for machines to provide higher accuracy mechanisms and kinematic chains or to adjust the systems already built in order to adequate it to reach to a better precision of the tasks. The current paper shows the results of a comprehensive analysis applied for RRR-RR robotic system already build including two versions of static analysis and modal analysis, using the modern virtual instruments. The main stages pursued was: design of the mechanisms and kinematic chains for each rotation joint, in accordance with the real robot, modelling of the connections and the mesh for each element and surface, simulation and model analysis using FEM specialized instruments. A final indication about the characteristics to improve is presented.
Authors and Affiliations
Gabriel MUNTEANU, Adrian GHIORGHE
Fault Detection in Industrial Air - Processing Sensors Controlled System
The paper describes the development of enhanced model-based and knowledge-based techniques, which are used for fault detection in air-processing, sensors controlled system, under real operation conditions. The developed...
Evaluation of the Equipments Operational Reliability in XPS-Manufacturing Complexes
The present paper describes the creation of reliability data trends, used as a basis for the further development of some advanced reliability models and techniques. The developed methods, models and techniques are then a...
Computation of the Heat Exchange Coefficient in Cylindrical Coordinates Mathematical Modelling of Castings Solidification
The paper discusses the advantages of utilizing cylindrical coordinates in the mathematical modelling of the solidification of castings with rotational symmetry. In this case the mould - casting assembly is divided into...
The Analysis of the Technologic Parameters Influence in Obtaining the Alloyed Sintered Steels by Two-Steps Sintering
In the paper there are presented the results of the experimental research for elaborating Mn, Mo, Cr, B and Graphite alloyed steels. There were elaborated mixings with 3% Mn and Fe, 1.5% Mo, 1% Cr and 0.5% B, which have...
Systems Movement Data Acquisition
In the present paper, author introduces a system that is used to plot the experimental characteristics of rotational or linear mechanisms movement. The system presented here has an incremental transducer, a microcontroll...