A COST-EFFECTIVE RESONANT SWITCHED-CAPACITOR DC-DC BOOST CONVERTER - EXPERIMENTAL RESULTS AND FEASIBILITY MODEL
Journal Title: Power Electronics and Drives - Year 2018, Vol 2018, Issue 1
Abstract
This paper presents results of experimental research of a resonant switched capacitor voltage multiplier in a cost-effective topology (CESCVM) with a limited number of active switches. In the charging mode of the switched capacitors, the converter utilizes one active switch only and a required number of diodes. Therefore, the cost of the converter is decreased compared with that of a classical SCVM converter, owing to a lower number of the switches and gate driver circuits, as well as a smaller PCB area. Moreover, the CESCVM has simpler control circuits and higher reliability. This paper presents original experimental results of the operation of the CESCVM converter. A concept of the boostrap supply of the gate drivers of the flying switches is also examined.
Authors and Affiliations
Zbigniew Waradzyn, Robert Stala, Aleksander Skała, Andrzej Mondzik, Adam Penczek
Keywords
Related Articles
- EP ID EP408047
- DOI 10.2478/pead-2018-0004
- Views 53
- Downloads 0
UNIVERSAL SPEED AND FLUX ESTIMATOR FOR INDUCTION MOTOR
In the paper the concept of the universal speed and flux estimator with additional parameters estimators is presented. Proposed solution is based on the MRAS type flux and speed estimator and is dedicated for automotive...
SLIDING MODE SPEED CONTROL OF INDUCTION MOTOR DRIVE USING TIME-VARYING SWITCHING LINE
In this paper an equivalent sliding mode control method of an induction motor speed is discussed. In this method the control signal consists of two parts: continuous and discontinuous one. Very good dynamical response of...
A Very Low Speed Sensorless Control Induction Motor Drive with Online Rotor Resistance Using MRAS Scheme
In this paper, a sensorless indirect stator flux oriented control (ISFOC) induction Motor drive at very low frequencies is presented. The Model Reference Adaptive System (MRAS) scheme is used to estimate Simultaneously t...
Model Predictive Control of Four-Leg Three-Level Flying Capacitor Converter: Influence of Model Parameter Mismatch
This paper presents a control method for a four-leg three-level flying capacitor converter (FCC) operating as a shunt active power filter (SAPF), based on model predictive control with finite number of control states (FS...
Finite set model predictive speed control of induction motor with long horizon
Background: The paper presents predictive speed control of induction motor. Material and methods: The structure with finite control set and long prediction horizon was used. The control process is divided into two parts:...