A high step up Application of Stand-Alone Photovoltaic and Battery Power Systems
Journal Title: International Journal of Science Engineering and Advance Technology - Year 2015, Vol 3, Issue 5
Abstract
A three-port dc–dc converter integrating photovoltaic (PV) and battery power for high step-up applications is proposed in this paper. The topology includes five power switches, two coupled inductors, and two active-clamp circuits. The coupled inductors are used to achieve high step-up voltage gain and to reduce the voltage stress of input side switches. Two sets of active-clamp circuits are used to recycle the energy stored in the leakage inductors and to improve the system efficiency. The operation mode does not need to be changed when a transition between charging and discharging occurs. Moreover, tracking maximum power point of the PV source and regulating the output voltage can be operated simultaneously during charging/discharging transitions. As long as the sun irradiation level is not too low, the maximum power point tracking (MPPT) algorithm will be disabled only when the battery charging voltage is too high. Therefore, the control scheme of the proposed converter provides maximum utilization of PV power most of the time. As a result, the proposed converter has merits of high boosting level, reduced number of devices, and simple control strategy.
Authors and Affiliations
L S N Sairam| M.tech(Research scholar), in Dept. of Electronics And Communication Engineering Kakinada Institute Of Engineering And Technology-II Yanam Road , Korangi-533461, Ch. Vinod Kumar| Associate Professor in Dept. of Electronics And Communication Engineering Kakinada Institute Of Engineering And Technology-II Yanam Road , Korangi-533461
Providing Best Quality Of Video Streaming Using Ames Method
In wireless networks(mobile networks) the wireless link capacity cannot be stable with the demand of traffic over the networks. Due to the gap between the traffic demand and the link capacity it results in poor servic...
A Novel Controlled Method Of Transformer Less Cascaded H-Bridge STATCOM
This work is a mix of transformer less static synchronous compensator (STATCOM) and Cascade multilevel Hconnect converter topology. This proposed controller current circle as well as have dc capacitor voltage control....
Huddling For Anonymization Of Compacted And Disseminated Public Systems
Social network: a social structure consists of nodes and ties. Noes are the individual actors within the networks May be different kinds May have attributes, labels or classes Ties are the relationships between the a...
New Hybrid Active Filter Topology for Harmonic Resonance Suppression
Accidental arrangement as well as parallel resonances, due to the tuned latent channel and the line inductance, may bring about extreme symphonious twisting in the mechanical power framework. This venture shows a half...
A new Security approach for integrating wireless adhoc network using octant bit computation and routing test
Ad hoc networks are a kind of network that has no centralized body and in order to communicate with the nodes it has no fixed topology.In this paper we propose to use binary masking of octant bits and shared cryptogr...