A NEW 3D DESIGN METHOD FOR FOOTWEAR SOLES USING DELCAM PowerSHAPE-e SYSTEM
Journal Title: Annals of the University of Oradea. Fascicle of Textiles, Leatherwork - Year 2016, Vol 0, Issue 1
Abstract
Design methods of soles and soles injection moulds must be accurate, timely and at the same time, accessible to a wide category of soles and injection moulds designers and manufacturers. For designing soles and injection moulds for soles, various dedicated CAD/CAM systems have been developed, such as: Delcam Shoe Solution (3D), Delcam PowerSHAPE-e (2D and 3D), Padsy II (2D) and Padsy III (3D), Shoemaster System (2D and 3D), Lectra System (2D and 3D), Parmel System (2D) and ATOS II System (3D). These systems are equipped with colour displays, plotters, digitizers, terminals and other equipment dedicated for computer aided design activities. Designing 3D soles models using computer systems enables the prevention of ambiguities inherited from 2D drawings, thus reducing errors and remanufacturing. Depending on the design complexity of soles, the technical means available for copying shoe soles and the technologies at the disposal of the soles manufacturers, soles and injection moulds designers adopt various design methods. Not all CAD/CAM systems are accessible for all users, because often their purchasing costs are high. Design method developed and presented in this paper, uses Delcam PowerSHAPE software program, which has the advantage that it can be accessed free of charge from the manufacturer's website. At the same time, this software program provides the user with all the necessary tools and instruments needed to design the most complex injection moulds and footwear sole.
Authors and Affiliations
Cozmin IONESCU, Cornelia LUCA, Bogdan SÂRGHIE
Keywords
Related Articles
- EP ID EP230718
- DOI -
- Views 100
- Downloads 0
STRETCH FABRICS IN LEATHER MANUFACTURING: PERFORMANCE PROPERTIES OF STRECH LEATHERS
Product variability of manufactured leather goods such as garment leathers could be closely related to the wear comfort because each material forming the garments are affected the comfort properties of the products. Cons...
STUDY OF THE INFLUENCE OF WOOL TYPE USED IN A YARN, IN TERMS OF TENSION
The use of yarns for manufacturing textiles is increasing in modern times, and new, better methods for making yarns are employed. Yarns are the elements of which textiles are made. In order to diversify the assortment of...
PIGMENT PRINTING OF COTTON FABRICS WITH CYCLODEXTRIN AND BIFUNCTIONAL REACTIVE DYE
Beta-cyclodextrin, which has seven glucopyranose units, have ability to make inclusion complexes with the appropriate molecules that are called guest molecules. The inclusion complex occurs in the apolar cavity of beta-c...
EFFECT OF ULTRAVIOLET LIGHT ON THE PROPERTIES OF DYED COTTON CELLULOSE
Textile dyes have been reported of causing various stages of contact dermatitis. Reactive dyes are widely applied in dyeing cellulose fiber based textiles (100% cotton), skin fibers (hemp, flax), regenerated cellulose (c...
INVESTIGATION OF COLOR PARAMETERS AND FASTNESS PROPERTIES ON DIFFERENT KNITTED FABRIC STRUCTURES DYED WITH REACTIVE DYES
The main objective of this paper was to analyze various color parameters and measure the fastness properties on different fabric structure like as plain single jersey, single lacoste, Terry fleece and heavy single jerse...