A New Car-Following Model: As Stochastic Process using Multi Agent System
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 2, Issue 10
Abstract
In recent years, the research in topic of car-following has become an increased importance in traffic engineering and safety driving. Various theories attempt to describe the vehicular traffic flow process and the interaction between adjacent vehicles in the same lane. In this paper we present a new model for car-following models, which integrates some real-life factors that need to be considered, such as the random reaction time of each car. Our architecture is based on the combination of Multi-Agent Systems (MAS) and a stochastic model to capture the randomness of individual agent (car). which are able to react according to the real situation of the network. The obtained results illustrate that using the randomness in the reaction of agents enhance greatly the performance of simulation
Authors and Affiliations
Mounir Gouiouez1
PERFORMANCE ANALYSIS OF VCR SYSTEM WITH VARYING THE DIAMETERS OF HELICAL CONDENSER COIL BY USING R-134A REFRIGERANT
Vapor compression machine is a refrigerator in which the heat removed from the cold by evaporation of the refrigerant is given a thermal potential so that it can gravitate to a natural sink by compressing the vapor prod...
Results of Comparative Analysis of BPSK & QPSK using Equalized OFDM
The main aim of the communications system is to provide a wide variety of communication services such as high speed data, minimum ISI & ICI as we all well aware about it. In this aspect the OFDM communication...
Study on ZIGBEE Technology
ZIGBEE is one of the most widely used transceiver standard in wireless sensor networks. Zigbee over IEEE 802.15.4., defines specifications for low rate WPAN(LR-WPAN) to support lower monitoring and controlling devices....
Comparison of PID and Fuzzy Controlled DC to DC Converter with Inductor Resistance
The DC-DC boost converter reveals highly non-linear and non-minimum phase properties, is very difficult task to design a controller that is healthy against load variation. For this purpose a Fuzzy PID Controller is prop...
DEVELOPMENT OF A METHOD OF SIMULTANEOUS DETERMINATION OF THE CONDUCTIVITY AND THERMAL DIFFUSIVITY OF MATERIALS
There are several methods of measures of thermo physical properties. The methods of transient state are used to determine the thermal diffusivity and those of steady state who used to determine the thermal conductivity....