A new treatment design for water contaminated with phenol
Journal Title: Environmental Health Engineering and Management Journal - Year 2019, Vol 6, Issue 3
Abstract
Background: Several important designs have been applied to remove toxic and hazardous organic substances like phenol and phenol compounds from wastewater, but there is a need to seek an alternative design to effectively remove organic pollutants from water to less hazardous compounds and a costeffective system. Methods: A modified internal loop airlift reactor was designed to remove the organic pollutants in synthetic wastewater using an efficient and cost-effective treatment technique by means of a synergistic effect of combination oxidation, stripping, and adsorption. The influence of the current style was experimentally examined in the treatment of synthetic phenol contaminated wastewater. The practical device was tested under different airflow rates range (2-15 L/min) through gross difference retention period (5-60 minutes) at a various molar ratio of phenol to hydrogen peroxide ranging from 1:10 to 1:20. Results: It was revealed that the preferred molar ratio of phenol to hydrogen peroxide equals to 1:20. Moreover, the airflow rate is 15 L/min with longer retention period of 60 minutes, indicating the maximum removal efficiency (89%) of phenol from the synthetic wastewater. Conclusion: Successful removal of phenol from water by the removal efficiency of 89% boosts the success of the executed design as well as the scenario of conducting the synergistic processes (stripping, oxidation and adsorption) in one device and also increases the chances of solving environmental problems via treating wastewater before recycling and releasing it into natural water sources.
Authors and Affiliations
Ali Abdul Rahman-Al Ezzi , Salam H. Alhamdiny
Keywords
Related Articles
- EP ID EP675761
- DOI DOI: 10.15171/EHEM.2019.21
- Views 261
- Downloads 0
Evaluation of the steam sterilization quality and assessment of knowledge, attitude, and practice of clinical directors regarding infection control in dental clinics: A cross-sectional study in Mashhad, Iran
Background: The sterilization cycle is one of the most important parts of infection control. Accordingly, the present study was conducted to assess the quality of steam sterilization and compare the knowledge, attitude...
Magnetic nano-biocomposite CuFe2O4@methylcellulose (MC) prepared as a new nano-photocatalyst for degradation of ciprofloxacin from aqueous solution
Background: Antibiotics such as ciprofloxacin (CIP) are even more important in bacterial resistance, even at low concentrations. The aim of this research was to synthesize CuFe2O4@methylcellulose (MC) as a new nano-photo...
Wastewater reuse in agriculture: A review of soil and crops parasitic contamination, associated health risks and mitigation approach
Background: Wastewater reuse in agriculture can potentially result in adverse health implications including parasitic diseases spread. Trichuris, Ascaris, and Giardia are major pathogenic parasites of concern associate...
Health risk assessment of heavy metal exposure from indoor dust: A case study of residential buildings in Isfahan, Iran
Background: Heavy metals (HMs) are toxic pollutants whose concentrations in confined spaces might cause severe health impacts. This study aimed to determine the concentration and health risk of As, Cd, Co, Pb, Mn, Ni,...
A study on seepage data utilized in the safety assessment of Haditha Dam: A simulation by SEEP/W model
Background: Special attention should be given to the seepage in dams since it may cause failure. Seepage is not considered in the total risk factor calculated using the International Commission of Large Dams (ICOLD), t...