A Novel FLC Controlled Energy Efficient Street Lighting Using NI LabVIEWl
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2014, Vol 12, Issue 5
Abstract
Energy saving has become very important issue now a days due to energy crisis. The rate of electricity is also increasing day by day. In this scenario, it has become essential to conserve the electrical energy Street lights are one of the major sources of energy wastage. The investigator has developed a new technology which can save near about 66.66% of electrical energy. This will not only save the electrical energy but also increase the life of electrical devices.
Authors and Affiliations
Shefali Thakral , Dr. S. Chatterji , Shimi S. L
A Pre-emptive Susceptive Design for Drowsy Driving Detection System
Now-a-days there are perceptible road accidents occurring due to many reasons. Carelessness of driver is one of the reasons for accidents particularly during nights. The main objective of our project is to design a...
Sustainable Biofuel Production From Water Hyacinth (Eicchornia Crassipes)
A major source of energy for our dynamic society is the burning of fossil fuels such as coal, petroleum and natural gas. These sources of energy have been found to have limited amounts available, and therefore are said...
A Nonlinear Controller for Photovoltaic Water Pumping System
The aim of this work is to suppy an energy for photovoltaic cell and that energy will go to the inverter and then went to induction motor to be operating certain speed then water pumb process achieved. Main target...
Spectrum Sensing Based on Cyclostationary Detector using USRP
With the rapid increment in wireless applications and due to improper utilization of spectrum band, it becomes very necessary to handle spectrum scarcity problem. Cognitive radio is one of the promising solution for hand...
An Overview on Vibration Analysis Techniques for the Diagnosis of Rolling Element Bearing Faults
Rolling element bearings comes under the critical category in many rotating machineries, mainly in chemical industry, aviation, nuclear power stations etc. Vibration monitoring and analysis is useful tool in t...