A PROJECT ON ANALYSIS OF BI-DIRECTIONAL DC-DC CONVERTER WITH CLOSED LOOP CONTROL
Journal Title: International Journal of Science Engineering and Advance Technology - Year 2013, Vol 1, Issue 5
Abstract
A novel bidirectional dc–dc converter is presented in this paper. The circuit configuration of the proposed converter is very simple. The proposed converter employs a coupled inductor with same winding turns in the primary and secondary sides. In step-up mode, the primary and secondary windings of the coupled inductor are operated in parallel charge and series discharge to achieve high step-up voltage gain. In step-down mode, the primary and secondary windings of the coupled inductor are operated in series charge and parallel discharge to achieve high step-down voltage gain. Thus, the proposed converter has higher step-up and step-down voltage gains than the conventional bidirectional dc–dc boost/buck converter. Under same electric specifications for the proposed converter and the conventional bidirectional boost/buck converter, the average value of the switch current in the proposed converter is less than the conventional bidirectional boost/buck converter. The operating principle and steady-state analysis are discussed in detail. Finally, a 14/42-V prototype circuit is implemented to verify the performance for the automobile dual-battery system.
Authors and Affiliations
I. Mahesh Babu| PG Scholar, Associate Professor NCET, Vijayawada maheshbabu.ikk@gmail.com, Firozali Mohammed| PG Scholar, Associate Professor NCET, Vijayawada firozalimd1@gmail.com
Keywords
Related Articles
- EP ID EP16230
- DOI -
- Views 389
- Downloads 19
Framework of Matrix Factorization to Achieve Rating Prediction Task
We propose a social client wistful estimation approach and figure every client's notion on things/items. Besides, we consider a client's own wistful properties as well as contemplate relational nostalgic impact. At t...
A Three Phase Four Wire Network Based Interleaved HighFrequency Inverter with Single-Reference Eight-Pulse-Modulation Technique for Fuel Cell Vehicle Applications
This paper presents a three phase four leg inverter with neutral connected to load. The inverter hybrid modulation technique consisting of singe-reference eight-pulse-modulation (SREPM) for front-end dc/dc converter...
A Reconfigurable Less Power Asynchronous FPGA Design with Power Gating and Level encoding dual rail technique
The implementation of a low power logic based asynchronous circuit with the help of power gated logic. In asynchronous power gated logic (APL) circuit, each pipeline stage was incorporated with efficient charge recov...
Enhanced Protocol for data exchange through Natural Wireless Ad Hoc Networks
Conviction is based on the primary illustration contact between users. Our proposal is a absolute selfconfigured protected procedure that is capable to generate the network and distribute secure services without any i...
MODELLING AND SIMULATION OF LOSSLESS DAMPING REDUCTION BY VECTOR CONTROLLED AC MOTOR DRIVE WITH AN EFFICIENT LC FILTER
In this paper Active damping technique is used to damp out the unwanted resonant frequency oscillations and proposed for lossless damping of vectorcontrolled ac drives with an efficient LC-Filter. This paper mainly co...