A research technique for the effect of higher harmonic voltages on the operating parameters of a permanent magnet synchronous generator
Journal Title: Вестник МГТУ - Year 2017, Vol 20, Issue 4
Abstract
Nowadays permanent magnet synchronous machines those frequency-controlled from stator side with frequency inverters made on the basis of power transistors or fully controlled thyristors, are widely used as motors and generators. In future they are also promising a good application in transport, including marine. Modern frequency inverters are equipped with a control system based on sine-shaped pulse width modulation. While shaping the voltage in the output of the inverter, in addition to the fundamental harmonic, higher harmonic components are also included in the voltage shape, which certainly affect the operating parameters of the generator (electromagnetic torque, power, currents). To determine this effect the modeling and investigation technique of higher harmonic voltages in the "electric network – frequency converter – synchronous machine with permanent magnets" system has been developed. The proposed equations of a frequency-controlled permanent magnet synchronous machine allow relatively simply reproduce the harmonic composition of the voltage in the output of a frequency inverter equipped with the control system based on a sinusoidal pulse width modulation. The developed research technique can be used for inverters with any number and composition of voltage harmonic components feeding a stator winding of a permanent magnet synchronous machine. On a particular case, the efficiency of the research technique of the higher harmonics influence on the operating parameters of the generator has been demonstrated. At the same time, the study has been carried out taking into account the shape of the voltage curve feeding the windings of the synchronous machine containing in addition to the fundamental harmonic the 8, 10, 11, 13, 14 and 16-th harmonic components, and the rated active power of the synchronous machine has been equal to 1 500 kW.
Authors and Affiliations
L. H. Hasanova, R. I. Mustafayev
Keywords
Related Articles
- EP ID EP255658
- DOI 10.21443/1560-9278-2017-20-4-705-713
- Views 133
- Downloads 0
Estimate of the trophic status ofsubarctic Imandra Lake
The object of study isImandra Lake – the largest reservoir of the Murmansk region. The lake is being influenced by the long-term and multi-factorial activities of mining and ore processing industries, air pollution and e...
Ti-Zr placer mineralization in Neoproterozoic (Upper Riphean) rocks of Kildin Formation and in contemporary beach sands of Sredny and Rybachy Peninsulas, Kola Region
Concentration mechanisms of titanium-zirconium placer mineralization in Neoproterozoic terrigenous rocks of Zemlepakhtinskaya Formation, Kildin Group, and in contemporary beach deposits from Sredny Peninsula and Motka Ca...
Estimating the rockburst hazard of hard rocks based on laboratory test results
The relevance of the problem under study is based on the fact that dynamic fractures of mine workings occur in rock masses when developing mineral deposits. Safety assurance of mining depends on the awareness of pronenes...
Raman spectra of impact zircons in the Jarva-varaka layered massif (the Monchegorsk ore region, the Kola Peninsula)
Zircon crystals from granophyre norites of the Jarva-varaka massif of the Monchegorsk ore region (the Kola Peninsula) have been studied by means of back-scattered electron (BSE) imaging and Raman spectroscopy. The Jarva-...
Chemical and environmental assessment of the bottom sediments in the Irtysh River (Tyumen Region, Russian Federation)
The total concentration of Al, Co, Fe, Mn, Pb, Cu, Zn, Sr, As, Cr, Ni has been determined in the test portions of the bottom sediments (sand, loamy sand, sandy loam, silt and clay loam) in the lower reach of the Irtysh R...