A Review of Recent Results on 3D Effects
Journal Title: American Journal of Engineering and Applied Sciences - Year 2016, Vol 9, Issue 4
Abstract
Abstract Three dimensions or three-dimensional or 3D are expressions that characterize the space around us, as perceived by our vision, in terms of width, height and depth. The term "3D" is also (and improperly) used to refer to the representation in synthetic (digital) images, the relief of stereoscopic images or other images in relief and sometimes even the simple stereophonic effect, which Can only render 2D (it is therefore only the calculation of the projected projections, the shadows, the renderings of materials). In mathematics, this notion corresponds to Euclidean geometry in space. The space is marked by three orthogonal axes, contrary to the plane composed of two dimensions. Since its origins and long before the appearance of colour, cinema has exploited stereoscopy, mainly through the processes of anaglyphs. During the 1950 s, the Hollywood studios exploited the polarized filter system and then, from the 2000 s onwards, with the adoption of digital formats, the rooms also equipped the electronic principle with alternating shutter ("active" glasses). Despite some anaglyphic experiments since the 1930 and 1950 s, the commercial success of 3D television became a reality from the end of the 1990 s to a real industrial development from the year 2000. Two principles and devices for Stereoscopic effects are commercialized: Of the "active" type with electronic bezels or of the "passive" type with polarized filter goggles. More complex and costly to industrialize in particular with regard to large screens, auto stereoscopy (relief effect without bezel) was introduced with Alioscopy since the late 1990 s, on the lenticular principle. Stereoscopic videoprojection intended for the general public requires electronic "active" glasses or a special screen (metallised or offering some refraction of light) associated with "passive" glasses with polarized filters. Three-Dimensional (3D) effects close to sharp corners of a hole in a plate with finite thickness are investigated in the present contribution. The results from detailed 3D finite element model are analyzed to investigate the stress intensity of various fracture modes caused by the presence of a finite thickness. The results expressed in terms of stressed are compared with some recent equations. The comparison between numerical and theoretical results shows a sound agreement. Copyright © 2016 Filippo Berto, Relly Victoria V. Petrescu and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Filippo Berto, Relly Victoria V. Petrescu, Florian Ion T. Petrescu
Keywords
Related Articles
- EP ID EP202508
- DOI 10.3844/ajeassp.2016.1247.1260
- Views 98
- Downloads 0
High-Speed for Data Transmission in GSM Networks Based on Cognitive Radio
Abstract This paper mainly studies data transmission DT rate in the modern communication systems. Increasing the need to improve the sensitivity of the control systems to detect low signals weak capacity density in view...
Evaluating the Effects of Climate Change and Variability on Water Resources: A Case Study of the Cheliff Basin in Algeria
Abstract In aim to well understand of the association between climate change, variability and their impact on water resources availability, an analysis was conducted of the trends in rainfall and stream flows across the...
From Structural Colors to Super-Hydrophobicity and Achromatic Transparent Protective Coatings: Ion Plating Plasma Assisted TiO2 and SiO2 Nano-Film Deposition
Abstract The implementation of the Ion Plating Plasma Assisted technology in the area of surface functionalization for structural color and relic preservation applications is presented. Interferometric structural colors...
Stiffened Panels Damage Tolerance Determination using an Optimization Procedure based on a Linear Delamination Growth Approach
Abstract The damage tolerance of delaminated composite panels under compressive load is usually numerically evaluated by means of computationally expensive non-linear approaches. In this study, an alternative numerical...
Optimizing an E-Waste Reverse Supply Chain Model while Incorporating Risk Costs
Optimizing an E-Waste Reverse Supply Chain Model while Incorporating Risk Costs Linh Thi Truc Doan, Yousef Amer, Sang- Heon Lee and Phan Nguyen Ky Phuc DOI : 10.3844/ajeassp.2017.949.958 American Journal of Engineerin...