A Review Paper on Laser Machining
Journal Title: JOURNAL OF ADVANCED RESEARCH IN PRODUCTION AND INDUSTRIAL ENGINEERING - Year 2017, Vol 4, Issue 3
Abstract
As we need precise edge cutting of some shapes which are complex in nature, for that laser machining is new trend. This paper includes an overview about laser machining. We will discuss what is laser, working principle of laser, how laser cutting is being done, how the laser process works and is the laser is right choice for cutting or not? Selection of material for cutting will also be discussed.
Authors and Affiliations
Gurpreet Singh,
Keywords
Related Articles
- EP ID EP272839
- DOI -
- Views 137
- Downloads 0
A Review Paper on Laser Machining
As we need precise edge cutting of some shapes which are complex in nature, for that laser machining is new trend. This paper includes an overview about laser machining. We will discuss what is laser, working principle...
Investigations for Statistically Controlled Tool Wear Solution of Titanium Alloys Using Ultrasonic Machining
The purpose of present work is to study process capability of ultrasonic machining (USM). Relationships between tool wear rate (TWR) and other controllable machining parameters (like: power rating; tool type; slurry conc...
Comparing Aerodynamic Design stability of Passenger Cars Manufactured for Indian Conditions
The primary objective of this study is to compare the aerodynamic impact and stability of passenger vehicle which are used in India. To measure and compare the aerodynamic drag of two car models widely used on Indian roa...
Effect of Tool Pin Profiles on the Tensile Strength of Friction Stir Welded AA6082-T6 Similar Joints
In this investigation, an attempt has been made to analyze the Tensile strength of similar joints Friction Stir Welded AA 6082 alloy plates under different tool pin geometries. The tool pin geometries used in this invest...
Experimental Investigation on Material Removal Rate (MRR) and Kerf Width in WEDM by Taguchi Method
This paper presents an effect of different process parameters on material removal rate (MRR) and kerf width in wire electrical discharge machining (WEDM). Die steel AISI D3 is used for experimental purpose due to its goo...