A STUDY ABOUT THERMAL SIMULATION IN SOLIDWORKS IN THE CASE OF DIFFERENT GEOMETRY OF THE PROCESSED PIECES BY CUTTING
Journal Title: Journal of Engineering Studies and Research - Year 2019, Vol 25, Issue 3
Abstract
In practice, different cutting processes are encountered, each process having different characteristics. Due to the existing friction forces between the workpiece and the cutting tool, a significant amount of heat is generated. This amount of heat can be determined by experimental measurements. This paper aims to study the way in which the temperature is propagated in the workpiece, so that the phenomenon can be understood and determined how this excessive heat can be removed from the cutting area.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP660895
- DOI 10.29081/jesr.v25i3.330
- Views 101
- Downloads 0
EVALUATION OF THE HEATING SYSTEM FROM AN INJECTION MOLDING MACHINE
Injection is an economical process characterised through an increased productivity that leads, in the majority of cases, to finite pieces. The process of injection includes two distinctive phases, firstly, when the melti...
A COMPARATIVE STUDY BETWEEN WATER-GAP AND AIR-GAP DISTILLATION MEMBRANES FOR REMOVAL OF SALTS FROM SALINE WATER BY DESALINATION METHOD
The water deficit for consumption in various daily activities is more pronounced especially in countries where rainfall is low or in those areas where water demand is higher than available resources. This paper is a comp...
DETERMINATION OF ACETIC AND PROPANOIC ACIDS CONCENTRATION IN NIGERIAN KEROSENE
The paper aims to determine acetic and propanoic acid concentrations in some selected samples of kerosene used in Nigeria. The Armfield Liquid-Liquid Extraction Unit was employed to carry out the study. Distilled water a...
DEVELOPMENT OF CERAMIC MICROFILTRATION SUPPORT FROM MOROCCAN SAHARA CLAY
The new ceramic microfiltration support prepared from Moroccan clay (Laayoune region, South of Morocco) is reported in this paper. To optimize the support elaboration conditions, the powder clay is mixed with organic add...
NEW TRANSITION METAL OXALATO COMPLEXES WITH DABCOH22+ AS ADVERSE CATION: SYNTHESIS AND INFRARED STUDY
On allowing DABCOH2(HC2O4)2 to react with transition metal dihalides in ethanol, a new series of complexes of general formula M(oxalate)2 DABCOH22+. nDABCOH22+.2X- (n=1/2;1) have been obtained. When (n=1) a dimeric struc...