A Study of Composite Surface Hardness When Cured Using Special Accessories with a Curing Light

Journal Title: Dental Research and Management - Year 2020, Vol 4, Issue 1

Abstract

The study was carried out to compare the Vickers Micro-Hardness (VHN) of composite resin of different diameters (6 mm and 10 mm) prepared in a split mold. The 6 mm and 10 mm diameter composite resin samples were cured with the tip of a fiber optic light. Additional sample for same size were cured with the same tip after a mirror or a lens accessory was mounted to it. All the specimens were cured for 40 seconds. The hardness was calculated for both top and bottom at the center and the periphery. The results showed that the hardness of top surface was higher than that at the periphery. The mean hardness value for specimens cured with the light tip was higher than the hardness of specimens cured with their accessory. Conclusion mirror or lens didn’t potentiate light but distribute the energy to a larger area, resulting in less energy applied to the same small surface area, which reduced the hardness.

Authors and Affiliations

Samir Koheil

Keywords

Related Articles

Adhesive Luting in Ceramic Inlays and Porcelain Laminate Veneers

Ceramic inlays, composite inlay-onlays and porcelain or zircon laminate veneers relay to a great extent on the acceptable clinical performance of adhesive luting as it considered the weakest poin...

Improved Super-elastic Ti–Ni Alloy Wire Treatment for Skeletal Class III Malocclusion with Anterior Crossbite Dentition

A 20-year-old man presented at our clinic with a primary complaint of irregular dentition and reverse bite. Clinical examination revealed skeletal Class III malocclusion with an anterior crossbite and a completely blocke...

Dental Treatment of Autistic Patients

Autism is a developmental disorder characterized by difficulties in social and communication interactions. Parentally induced autism, brain injury/anomalies, constitutional vulnerability, and developmental aphasia have b...

Endodontic management of mandibular second molar with Vertucci II canal configuration using Cone Beam Computed Tomography

Permanent mandibular second molars usually show two roots, one mesial and the other distal root with four root canals (two mesial and two distal canals). Variation in root number and canal morphology rarely occur in the...

Zimmerman-Laband Syndrome Oral Manifestations - A Case Report

Zimmerman-Laband syndrome was reported by Zimmerman in the year 1928 which is a rare inherited autosomal dominant disease characterized by generalized enlargement of the attached and marginal gingiva, abnormalities of no...

Download PDF file
  • EP ID EP678494
  • DOI https://doi.org/10.33805/2572-6978.137
  • Views 150
  • Downloads 0

How To Cite

Samir Koheil (2020). A Study of Composite Surface Hardness When Cured Using Special Accessories with a Curing Light. Dental Research and Management, 4(1), -. https://europub.co.uk/articles/-A-678494