A STUDY ON THE EIGEN - MODE INFLUENCED BY THE INTERFACE BETWEEN TWO DIFFERENT DIELECTRICS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 4, Issue 6
Abstract
FEM has been carried out to investigate the eigen - mode of a square cross section waveguide filled with two different dielectrics. Vector Helmholtz equation was re - configured as transverse spa ce dependent form to facilitate FEM. The eigen - equation of FEM w as established from element equations of triangular mesh. For the transverse vectot field, the equation was constructed using tangential edges of the element mesh. The equation for the transverse vector potential component was made basing on its nodal points . These equations were combined into a gloval square matrix to calculate the eigen - modes. TE and TM eigen - modes influenced by the interface were obtained using the Krylov - Schur iteration method. As a result, each transverse vector fields and their vector potential component have been revealed by schematic representation to identify their physical propert y . And spectra of TM eigen - mode were compared with results of the theoretica l calculation.
Authors and Affiliations
Yeong Min Kim
Keywords
Related Articles
- EP ID EP137699
- DOI -
- Views 77
- Downloads 0
MICROSTRUCTURE AND WEAR PROPERTIES OF ZIRCONIUM NANO METAL MATRIX COMPOSITES
A356.1 Aluminium alloy reinforced with Nano-sized ZrO2 particle are widely used for high performance applications such as automotive, military, aerospace, and electric industries because of their improved physical...
DEVELOPMENT AND FAILURE MODE ANALYSIS OF CENTERING AND PLUNGE MACHINE (500)
Newly developed machines has to undergo different tests to ensure the safety and reliability of machines. This paper deals with the failure mode analysis of the newly developed Centering and Plunge machine. Differ...
The Cretaceous - Tertiary Clastic Rocks Weathering Indices: A case Study Of Maastrichtian?- Paleocene Rock
A total number of 210 ditch cuttings samples of carbonaceous shale, sandstones and mudstones of Maastrichtian? Paleocene sequence from Mushe , Sa, Tuma and Ziye wells from Bornu Basin were considered for this study. The...
STRESS ANALYSIS OF IC ENGINE PISTON FOR DIFFERENT MATERIAL AND PRESSURE LOAD USING FEA
This present work describes the stress distribution of two different aluminum alloys piston by using finite element method (FEM). The piston is designed for a single cylinder petrol engine using SOLIDWORKS 2013 software....
A Review of Fatigue Analysis for Leaf Spring Using Finite Element Methodology and Experimentation for Evaluating the Variation in Material and the Geometry Affecting the Performance Over Life
Parabolic leaf spring plays a vital role in the suspension system. Since the failure of leaf spring is attributable to its fatigue loading. Cycle loads of a constant or varying magnitude and direction act and on t...