A Two-Step Inverse Analysis Approach Used to Identify the Mechanical Properties of Metallic Materials Subjected to Large Plastic Strains. Applications to Local Investigations of Surface Layer’s Behaviour
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 3
Abstract
The aim of this research work is to improve the experimental and numerical analysis of the local mechanical properties corresponding to metallic alloys used by bulk forming processes. A non-onventional upsetting test and an optimal direct extrusion device designed by the authors are used in order to identify the constitutive rheological equations and the friction models, starting directly from measured load-stroke curves. A two-step inverse analysis strategy is thus proposed starting from a complete Finite Element Model of the experimental tests and using a strong numerical coupling of the FEM with an optimization platform in charge with the automatic parameters identification. The obtained results are correlated with experimental investigations based on X-Ray, EBSD and hardness measurements concerning the microstructure and the local mechanical properties of the surface layer obtained from a conical extrusion process.
Authors and Affiliations
Adinel GAVRUS, Henri FRANCILLETTE, Duc Thien PHAM
Keywords
Related Articles
- EP ID EP596062
- DOI -
- Views 55
- Downloads 0
Lean Manufacturing - Process Automation and Elimination of Production Losses in Romanian Automotive Industry
Lean Manufacturing is currently the most important management method for manufacturing companies. The method, used in conjunction with the quality tool called “six sigma”, is based on Toyota Production System and has bee...
Basic Mathematical Modeling of the Environmental Processes in the Lower Danube Region [I]
In most environmental pollution problems, the pollutant is released to the environment by the, almost always, turbulent flow of a carrier fluid. The pollutant mixes with the surrounding fluid (air or water) and undergoes...
Morphological Aspects of Thermosetting Polymers/Zn Composite Coatings
The present work has the purpose of studying the morphological aspects of composite coatings having zinc matrix and thermosetting polymers (PF resin type NOVOLAC - RESITAL 6358/1 and epoxy resin type DINOX 110L) as dispe...
Electrical Properties of Ultra-Sonicated Epoxy Resin
As ultra-sonication is a mostly used method to disperse the particles into the polymer matrix, the aim of this study is to point out the effect of epoxy’s exposure to ultra-sounds over the electrical properties, especial...
Design and Flow Modelling of Ballast Tank In-Line Ejector
The purpose of this paper is to present the stages of designing a water in-line ejector used for ballast tanks stripping operation. The design operation was performed using NX Siemens CAD and ANSYS 15 for computer fluid...