A Voice Controlled Pick and Place Robotic Arm Vehicle Using Android Application
Journal Title: American journal of Engineering Research - Year 2017, Vol 6, Issue 7
Abstract
Robotics has become an interesting area of research in the field of Electrical Engineering. This is due to the vast potential it holds in reducing human effort in performing tasks faster while still maintaining operational accuracy. The recently introduced Android operating system used in many devices such as mobile phones, tablets and digital cameras is user friendly and can be extended to control smart and intelligent systems such as robots. This paper designed and developed a pick and place robotic arm vehicle using an android application to control the robot through voice commands. Arduino programming language, which is an open source and simplified version of C++ known for its friendly architecture was used to program the controller (ATMEGA328P). The integration of control unit with blue-tooth device was done to capture and read the voice commands. The robotic vehicle then operates as per the command received via android application. The device was designed to lift a maximum combined mass of 250g and it can communicate at maximum distance of 12m with high precision.
Authors and Affiliations
N. U. Alka,, A. A. Salihu,, Y. S. Haruna, I. A. Dalyop
Keywords
Related Articles
- EP ID EP401452
- DOI -
- Views 79
- Downloads 0
ICND2 MAESTRO - An Android App Companion and Cisco IOS Command Guide for Interconnecting Networking Devices 2
This study aimed to develop and Android application specifically for AMA Computer College - Makati, to improve ICND 2 (CCNA R&S Modules 3 and 4) classes as well as to motivate and inspire Cisco Networking Academy student...
Utilization Of Geotextile For Soil Stabilization
Soil stabilization is the process of improving the load bearing capacity and engineering properties of subgrade soil to support pavements and structures. This work examined the stabilization of two soil samples (lateriti...
Effect of Rotatory Inertial And Damping Coefficient on The Transverse Motion of Uniform Rayleigh Beam Under Moving Loads of Constant Magnitude
In this work, the effect of rotatory inertial and damping co-efficient on the transverse motion of Rayleigh beam subjected to moving loads of constant magnitude is investigated. The solution techniques employed is based...
Thermal Behavior of a Horizontal Hollow Tile Submitted To a Sinusoidal Excitation
This work presents a numerical study, in a transient state, of the thermal behavior of a horizontal alveolar structure filled with air and vertically heated by a sinusoidal excitation applied to its superior surface. The...
PVC Coated Glass Fiber Reinforced Composite Filament Material Production And Investigation Of The Mechanical Properties
In this work, the glass fiber filament was coated with PVC at the extruder in filament form. The filament material produced was woven with a weaving loom then pressed at 165 °C and 2.5MPa of pressure. In order to determi...