Accounting of Joint Work of Thin-Sheet Membranes with Fastening of the Stabilizer System
Journal Title: Металлические конструкции - Year 2016, Vol 22, Issue 2
Abstract
The article considers the existing methodology for determining the effective width of the plate when working together and reinforcing stiffener sheet membrane coating, including – the method of reduction ratios. It has been analyzed the applicability of this approach to solving the problems set forth in the works of P. F. Papkovich and Eurocode 3 (Part 1.5), where co-operation of the plate and the reinforcing member, when the lateral loading has been considered as the research object. The results, obtained using analytical methods, are supplemented by the finite element analysis of incorporating the sheet as a sheathing stiffened sheet plate and stiffened shell membrane in the form of a cylindrical surface of zero Gaussian curvature. The results indicate a significant influence on the value of the shell geometry of the inclusion in the joint work sheet cladding with eccentrically-compressed (stretched) reinforcing element.
Authors and Affiliations
Volodymyr Mushchanov, Vladimir Shpinkov
Keywords
Related Articles
- EP ID EP427275
- DOI -
- Views 141
- Downloads 0
Rational structural decisions load-bearing supporting structures dome diameter 15 m
Based on a critical analysis of the experience of the design and construction of domes, the most common designs bearing dome structures have been determined. The calculation of the domes and the analysis of the stress an...
Geometrical Modeling of Icing Process on the Conductors of Overhead Power Transmission Lines
Questions, touching geometrical modeling of simulation of icing process on the conductors for overhead power transmission lines, are considered in the article. The goal – definition and predictive modeling of ice load on...
Influence of Design Features of Power Lines to the Technology of their Construction
General information of the extent of backbone and interstate overhead power lines has been given. The classification of pylons has been presented. The advantages and disadvantages of the materials used for the supports h...
Accounting of Joint Work of Thin-Sheet Membranes with Fastening of the Stabilizer System
The article considers the existing methodology for determining the effective width of the plate when working together and reinforcing stiffener sheet membrane coating, including – the method of reduction ratios. It has b...
Determination of the Stress Concentration Coefficient in the Anchor’s Area of Composite Span Structures of the Road Bridges
The article presents the results of analysis of the tensely-deformed state of a five-span steel-reinforced concrete structure of a road bridge, made on a beam unbroken circuit. The calculation is performed in the LIRA co...