Active and Reactive Power Control of a Variable Speed Wind Energy Conversion System based on Cage Generator
Journal Title: International Journal of Advanced Computer Science & Applications - Year 2017, Vol 8, Issue 9
Abstract
This manuscript presents the modeling and control design for a variable speed wind energy conversion system (VS-WECS). This control scheme is based on three-phase squirrel cage induction generator driven by a horizontal-axis wind turbine through the overhead transmission network. In this manuscript, a static VAR compensator is proposed and connected with the squirrel cage induction generator terminals in order to regulate the system parameters, such as voltage, power. Through the pitch angle, the mechanical power was controlled through Simulink (Matlab) software. From the simulation results, the response of the proposed system offers good robustness and fast recovery under various dynamic system disturbances.
Authors and Affiliations
Mazhar Hussain Baloch, Waqas Ahmed Wattoo, Dileep Kumar, Ghulam Sarwar Kaloi, Ali Asghar Memon, Sohaib Tahir
Keywords
Related Articles
- EP ID EP260742
- DOI 10.14569/IJACSA.2017.080928
- Views 100
- Downloads 0
Improved Langley and Ratio Langley Methods for Improving Sky-Radiometer Accuracy
Improved Langley Method (ILM) is proposed to improve the calibration accuracy of the sky-radiometer. The ILM uses that the calibration coefficients of other arbitrary wavelengths can be presumed from the calibration coef...
Simulating Cooperative Systems Applications: a New Complete Architecture
For a decade, embedded driving assistance systems were mainly dedicated to the management of short time events (lane departure, collision avoidance, collision mitigation). Recently a great number of projects have been fo...
Quality of Service and Power Consumption Optimization on the IEEE 802.15.4 Pulse Sensor Node based on Internet of Things
The Purpose of this research is to determine the Quality of Service (QoS) Zigbee or IEEE 802.15.4 sensor Node use the indicators, i.e. the Receiver Signal Strength and PathLoss (attenuation (-dB)) at the time of communic...
Maximizing Throughput of SW ARQ with Network Coding through Forward Error Correction
Over the years, several techniques for improving throughput of wireless communication have been developed in order to cater for the ever increasing demand of high speed network service. However, these techniques can only...
Priority Task Scheduling Strategy for Heterogeneous Multi-Datacenters in Cloud Computing
With the rapid development in science and technology, cloud computing has emerged to be widely adopted in several IT (Information Technology) areas. It allows for the companies as well as researchers to use the computing...