Abstract

In this project we discussed the study and performance of air conditioner, air refrigeration and water conditioner system in a single unit. The main objective of this project is to develop the multifunctional system which can provide refrigeration effect, cold water and air conditioning effect with in regular air or space conditioning system. Air and water systems conditioning spaces by distributing the both conditioned air and water to the terminal units installed in the spaces for which the basic plan is given by civil department and the basic design is done by using REVIT MEP software. The air and water are heated or cooled in a central mechanical equipment room. The air supplied is termed as primary air to distinguish it from the recirculated or secondary room air. By using the peak cooling load values obtained in the heating and cooling load calculations the ton of refrigeration values for individual and total area is calculated which will be helpful for selection of accurate design for the residential building. by B. Shushma | M. Uday Bhaskar | N. Balaji | G. Srujan Yadav "Air-Water System Design using Revit Mep for a Residential Building" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23314.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23314/air-water-system-design-using-revit-mep-for-a-residential-building/b-shushma

Authors and Affiliations