Alumina Influence on the Corrosion Resistance of Composite Layers Ni-P-Al2O3
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 3
Abstract
This paper aims to analyze the corrosion resistance of composite layers based on Ni-P matrix and disperse phase alumina of 10 µm size, present in amounts of 5, 10 and 20 g / L in the nickel plating bath. The influence of alumina on the corrosion resistance of Ni-P-Al2O3 composite layers was tested in 0.1N hydrochloric acid solution compared to Ni-P layers with different phosphorus contents. The samples immersed in the corrosive environment were weighed every 7 days for 4 weeks. The corrosion rate was appreciated considering the loss of mass per area in time. Mass loss was calculated considering the total time of corrosion and the mass lost each week for determining the kinetics of the process. The variation curves of the corrosion rate are presented, depending on the chemical composition of the analyzed layers and the corrosion time.
Authors and Affiliations
Tamara RADU
Keywords
Related Articles
- EP ID EP581317
- DOI -
- Views 84
- Downloads 0
Creating Integrated System Between Lifecycle Quality Management and Finite Element Analysis to Improve Typical Turbine Blade Design as a Case Study
This article proposes a process to integrate efficiently the Finite Element Analysis in the Quality Life-Cycle Management in order to use the simulation engineering in analyzing and improving the design of one industrial...
Structure of the Eutectoid Zn-Al Alloy Obtained by Directed Solidification
This work analyses the structure of the eutectoid Zn-Al based alloy directionally solidified, with cooling rates ranging between 8.5-0.4 oC/sec. During cooling, the temperature gradient in the liquidus zone, respectively...
EDX Analysis of Laser Cladding Layers With Ni – Cr – B – Fe – Al Alloy
Multilayer cladding by injection of powder with 8.9% Cr, 4.5% Fe, 5.1% B, 2.4% Al, 0.6% Cu, Ni rest as chemical composition, in melted bath by a continuous wave CO2laser connected to x-y-z coordinate table was tested in...
Evaluated Work System and Environmental Risk for a Worker in Drilling for Methane Gas
Improving the safety and health at work is important not only in terms of human view, in order to reduce possibilities of accident to workers, but also as a way to ensure the success and durability work for a worker in d...
The Influence of Steam Treatment on Mechanical Properties and Abrasive Wear Behavior of Sintered P/M Steels
In this paper is a study of the influence of steam treatment on sintered P/M steels, for three different types of powder. The abrasive wear of steam-treated sintered iron is analysed by abrasion tests. The specimens were...