AN ANALYSIS OF THE MOTOR LIFE PROFESSIONAL OPERATING PREPARATION APPLICATION POSIBILITY IN MARINE DIESEL ENGINES
Journal Title: Tribologia - Year 2010, Vol 233, Issue 5
Abstract
Lubricating oils are characterised by improving the quality of the operation engines. Nevertheless, in extreme working conditions of the tribological systems (high pressures, velocities and temperatures, temporary lubricating lack during starting) the machine elements are not secured enough. In connection with the abovementioned problem, the idea to introduce an additional substance operating preparation into tribological systems (with the lubricating oils) was put forward. The chemical interactions of preparations have wide application. These preparations join permanently with lubricating oil, so they do not precipitate on the filters and do not create heat-insulating layers. The chemical interaction preparations improve antiwear and antiseizure properties considerably. Lubricating oils used in marine engines are purified filtering. In connection with this, the question arises if the operating preparations (which have higher density then oils and water) are able to join permanently with lubricating oil in order not to separate in the purifying process and what influence they have on lubricating oil ability to separate the water. The lubricating oil with operating preparation Motor Life Professional and water purifying research were presented in the article so as to answer the above questions.<br/><br/>
Authors and Affiliations
Andrzej Młynarczak
Keywords
Related Articles
- EP ID EP516861
- DOI -
- Views 44
- Downloads 0
KORELACJA POMIĘDZY ZMIANAMI STRUKTURALNYMI NAPROMIENIOWANEGO POLIETEROETEROKETONU A JEGO WŁAŚCIWOŚCIAMI MECHANICZNYMI
W artykule przedstawiono wyniki badań wpływu zmian strukturalnych w polieteroeteroketonie (PEEK) na jego właściwości mechaniczne. Polimer został poddany działaniu promieniowania gamma w dawce 50 i 150 kGy, energia promie...
AN ANALYSIS OF THE IMPACT OF THE FDM TECHNOLOGY PARAMETERS ON TRIBOLOGICAL PROPERTIES
The paper presents the results of tribological tests for sample models made by FDM technology. The ringshaped samples were made of the ABS P430 material using the Dimension 1200es machine. Disc-shaped counter-samples wer...
Analiza wymiany ciepła w pierścieniach uszczelniających
W pracy przedstawiono wyniki analizy wymiany ciepła w czołowym uszczelnieniu bezstykowym z mikrowyżłobieniami (mikrostrukturami) na powierzchni czołowej pierścienia uszczelniającego. Przedstawiono model termohydrodynamic...
COMPARISON OF THE LUBRICANT PROPERTY OF WATER, OIL-IN-WATER EMULSION TYPE HFA-E AND OIL TOTAL AZOLLA 46 AS WORKING LIQUIDS IN HYDRAULIC SYSTEMS
The article characterises and describes the results of research (carried out on four-ball machine) of the lubricant property of distilled water, oil-in-water emulsion type HFA-E (1% oil in water) prepared on base of conc...
Analiza procesu zużywania warstw napawanych w gliniasto-piaszczystej masie ściernej
W pracy przeanalizowano procesy zużywania zachodzące w warstwach uzyskanych poprzez napawanie materiałów na bazie FeC i Cr, zawierających pierwiastki przejściowe V,Nb,Mn i W oraz węgliki wolframu pod czas tarcia w glin...