An Analysis of Wire-Cut Parameters in Electric-Discharge of Titanium Alloys
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The present paper, focuses on wire electric dis-charge machine of titanium alloys. It can be considered as an attempt to develop two models of response variables, they are; the operating rate, the surface-roughness, and the rate of material removing, In the wire electric dis-charge machine process using the response surface methodology. The pilot plan is based on Minitab 18, and the analysis convey the major six parameters. ANOVA was applied to determine the importance of the advanced model, the test results confirm the validity and suitability of the advanced RSM-model. Lastly, the optimum parameter settings is improved.
Authors and Affiliations
Farook Nehadabed, Azwan Bin Sapit, Saad Kariemshather
Keywords
Related Articles
- EP ID EP657082
- DOI 10.24247/ijmperdaug2019141
- Views 93
- Downloads 0
ANALYSIS OF A PART USING DYNAMIC SIMULATION AND REAL TIME EXPERIMENTS IN PART FEEDERS
In the modern industrial world, agility in manufacturing and assembly line is the key for improving the productivity. Segregation and feeding of parts in assembly line is important for reducing the manufacturing lead tim...
Experimental Study of Mechanical and Metallurgical Properties of Friction Stir Welded Dissimilar Aluminum Alloys
Friction stir welding is a comparatively quiet new solid state metal joining process developed by the Welding Institute in 1991 and is used for joining of aluminum alloys and dissimilar materials which were difficult to...
An Assessment of the Soil Fertilization Status of IB-INW Zone of Rajasthan
All soil samples were separately monitored for physical and chemical variables like pH, electrical conductivity (E.C.), nutrient concentration of nitrogen (N), potassium (K), phosphorous (P), organic carbon (O.C.), organ...
Modalities of Diagnosis & Management of Small Blue Round Cell Tumor
The small blue round cell tumour is a group of a malignant neoplasm. Sino-nasal area is a very rare site for this tumour. This case of Sino-nasal small blue round cell tumour which is reported for the first time from our...
Case Study on Illegal Sand Mining in Tamil Nadu: Alternate Solution by Replacing Natural Sand by M-Sand
Sand mining is a practice, that is used to excerpt sand, mainly from quarry/ open pit. Sand is extracted from beaches, inland dunes, and mined from ocean beds and river beds. The excessive mining of river bed, to encount...