An Effect of Welding Type on the Mechanical Properties of Welding Joints
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
Welding is widely used in the construction of metallic structures. In service, these structures are prone to failure under different types of loadings: static and dynamic. A welding joint should have adequate strength to withstand these type of loadings under the service conditions which is designed to serve within them. This work tries to hold a comparison between two common welding techniques in the local workshops from the point view of strength. The research program included: tensile strength, impact strength, and micro hardness. As received structural bars of mild steel were cut and square butt welded. Two fusion welding techniques was selected: arc welding and oxy-acetylene welding for the availability of their equipment and possibility of using them outdoor. The results obtained during this humble work suggest that from the perspective of tensile strength, oxy-acetylene welding is better than shielded metal arc welding, while the latter is characterized by higher micro hardness and impact strength.
Authors and Affiliations
Mohammed Shaalan Abed Fathi, Qayshazim Ismael, Khalid Abbas Saleh
Keywords
Related Articles
- EP ID EP655875
- DOI 10.24247/ijmperdaug201970
- Views 86
- Downloads 0
Solving Fuzzy Transportation Problem using Ranking Function
In this paper, a method is proposed to find a solution of transportation problem in fuzzy environment with all parameters are fuzzy inequalities. To illustrate a proposed method a fuzzy transportation problem is solved a...
TO DESIGN AND STUDY THE PARAMETERS OF GEARS USING POWDER METALLURGICAL PROCESS SANJEEV KUMAR. A. P, ARJYO CHOWDHURY, DIGVIJAY SINGH
The residual porosity is an unavoidable phenomenon of the components produced by powder metallurgy process which in turn largely affects the strength property of the same. Now a day it is possible to control the porosity...
Optimization of Design and Operating Parameters for Enhancing the Performances of PEMFC with Serpentine Flow Fields
The performance of the Proton Exchange Membrane Fuel Cell (PEMFC) depends on various design and operating parameters. The present work is aimed to optimize the performance of 25cm2 PEMFC, with respect to one design param...
Numerical Investigation of the Drop Formation Mechanism and Study of the Droplet’s Pressure Contour
The current study provides the numerical investigation of the drop formation mechanism. Volume of fluid methods is used for the numerical simulation. The analysis contains 2% Polyacrylamide as the main fluid that dispers...
The Effect of Fly Ash on the Workability and Mechanical Properties of Concrete Slabs: A Review
Cement production in the world accounts for 5% of the annual anthropogenic global carbon dioxide production. This is mainly due to the vast amount of cement is used in the making of concrete slabs. However, the process o...