An Evaluation of Algae Biofuel as the Next Generation Alternative Fuel and its Effects on Engine Characteristics: A Review
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
Algae biofuels represent one of the most promising solutions to the current global energy crisis and climate change because of their potentially high yield, high production rate, biodegradability, non toxicity, carbon neutrality, and low emission profile. Moreover, non-arable land and non-potable water can be used for the production of algae biofuel with minimal attention and resource consumption. In this study, we compared algae biofuel and other conventional biofuels in terms of performance as well as combustion and emission characteristics of compression ignition engines. A thorough review of the available relevant literature and a critical analysis has been presented. The study results indicate that algae biofuel blends can be efficiently used as an alternative, renewable, and eco-friendly fuels without major modification to the existing engine. Algae biofuels contain an optimal combination of unsaturated fatty acids and oxygenated nature, the presence of excess oxygen molecules facilitates complete combustion of fuel resulting in better thermal performance along with reduced undesirable emission. This clean and green fuel is definitely the fuel of the future.
Authors and Affiliations
M. P. Joshi, S. S. Thipse
An Organic Composite Phase Change Material for Hot Food Storage: A Review
The paper reviews about the implementation of Latent Heat Storage System in the food storage techniques, due to its high- energy density and isothermal nature. It helps in sustaining the temperature of the hot food for a...
Immobilized PAni-TiO2 Nano-Photocatalyst Modeling for Photocatalytic Degradation of 1, 2-Dichloroethane using Response Surface Methodology (RSM) and Artificial Neural Network (ANN)
Heterogeneous photocatalytic degradation as an advanced oxidation process (AOP) is a complicated process, because many independent influential parameters can affect degradation efficiency as the response of the system. T...
Effect of EGR on Performance of CI Engine with Diesel and Cotton Seed Oil as Fuels
Automobile emission is one of the major problems in the environment. Engine emits the carbon monoxide (CO), unburnt hydrocarbon (HC) and smoke density, etc and causing a variety of health and environmental problems at th...
Design of a Four Throw Reciprocating Compressor Frame for Natural Gas
A reciprocating compressor is a mechanical device that is used to increase the pressure of a gas by reducing its volume. Compressed natural gas (CNG) is a fuel, which can be used in place of gasoline, diesel fuel and pro...
A Methodology and estimation of Film Thickness in Elastohydrodynamic Lubrication
Cam and tappetare always under gigantic stresses which lead to wear and tear of the same. Hence it must be identified, estimated and minimized for prolonged and smooth running of engine. This paper describes an approach...