An Experimental Analysis and Process Parameter Optimization on Friction Stir Welded Dissimilar Alloys
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 2
Abstract
The aim of this exertion is to examine on the tensile strength of dissimilar aluminium sheets are (AA6063 and AA5052) joined by FSW. The two aluminium sheets are arranged in a line with perpendicular rolling directions of the tool. The sheets are successfully welded and the welded sheets are tested under tension at room temperature in order to examine the strength. The two aluminium sheets are arranged in a line with perpendicular rolling directions of the tool. The Taguchi L9 experimental technique is picked to build the quantities of welding tests. The ideal range of process parameters and their possessions upon the tensile strength of the weld joints is analysed by ANOVA. The sheets are successfully welded and the welded sheets are tested under tension and hardness at room temperature in order to examine the strength. The result shows that the welding speed is 800rpm, feed is 30 mm / min and tilt angle 1.5 are the influential process parameters to join these dissimilar joints.
Authors and Affiliations
Shunmugasundaram M, Praveen Kumar A, Maneiah D
Keywords
Related Articles
- EP ID EP582192
- DOI 10.24247/ijmperdapr201939
- Views 60
- Downloads 0
Optimization of Parameters for Recycling of Steel Process by Grey Taguchi Technique
Optimization of process parameters of multiple response characteristics on secondary steel recycling by using Grey Taguchi technique is presented in this paper. Response characteristics such as Tensile strength, Hardness...
A Review of Machining Characteristics in Mechanical Drilling of Super Alloys
Super alloys are extensively used in the field of aerospace to manufacture aircraft engine components such as casings, rings, seals, fasteners, turbine blades, vanes, discs, shafts, combustors and general engine hardware...
Microstructure, Mechanical and Corrosion Properties of AISI 904 L Super Austenitic Stainless Steel Welds by Pulsed Gas Metal Arc Welding Process
This paper deals with the pulsed gas metal arc welding (P-GMAW) of AISI 904 L super austenitic stainless steel when 1.2 mm diameter of Super austenitic stainless steel filler wire was used. 5 mm thick AISI 904 L super au...
Experimental Investigation of the Performance of Internal Combustion Engine by Water/Methanol Injection
This project deals with the development and testing of IC engine using methanol with a water injection system. Nowadays there are many types of fuel injection for example throttle body injection, common rail direct injec...
A Review of Aluminium Alloy Metal Matrix Composites and its Industrial Application
Over the last ten years, composites material, plastics and ceramics have been the foremost materials used in many industries. The main goal for the use of matrix composite components in automotive, agriculture and mining...