An Experimental Investigation of Cutting Condition Influences on Hard Milling of AISI D2 Tool Steel
Journal Title: Engineering and Technology Journal - Year 2024, Vol 9, Issue 05
Abstract
The presented work aims to study the effects of cutting speed, feed rate and depth of cut on surface roughness Ra in hard milling of AISI D2 steel (58 ÷ 60 HRC) using carbide inserts. A factorial experimental design was used to evaluate the influence of input variables. The obtained results indicated that feed rate causes the most significant effect on surface roughness, whereas cutting speed and depth of cut have little influence. The interaction effects between cutting speed and depth of cut as well as between feed rate and depth of cut have the significant influences on surface roughness Ra. Moreover, the cutting speed of 92 ÷ 100 m/min, feed rate of 0.1 ÷ 0.11 mm/tooth, and cutting depth of 0.1 ÷ 0.12 mm should be recommended for reaching the smaller surface roughness Ra values, which play an important role for further studies on hard milling process.
Authors and Affiliations
Phan Van Nghi
Keywords
Related Articles
- EP ID EP735750
- DOI 10.47191/etj/v9i05.28
- Views 8
- Downloads 0
IMPROVING WIRELESS MIMO SYSTEM PERFORMANCE WITH CHANNEL ESTIMATION BASED BLOCK CODING
In modern wireless communication systems, a combination of multiple-input multiple-output (MIMO) system with the space time block coding (STBC) can be used in conjunction with receiver and transmitter diversity to achiev...
IMPACT OF THE PANDEMIC ON THE CONSTRUCTION PROJECTS OF DPWH NUEVA ECIJA 2ND DISTRICT ENGINEERING OFFICE
Several countries have ordered a complete national lockdown after the World Health Organization (WHO) labeled the coronavirus 2019 (COVID-19) outbreak a pandemic. These judgments have limited people's mobility and forced...
DETERMINATION OF CR (III) AND CR (VI) IN WATER BY SELECTIVE SEPARATION AND PRECONCENTRATION ON HYBRID RESIN
Simple and rapid method has been developed for separation, preconcentration and determination of Cr(III) and Cr(VI) species in water by using selective hybrid R-Cu-(OH)2 resin (HCR). The effect of pH value on the adsorbe...
PARTICLE SWARM OPTIMIZATION BASED LQR CONTROL OF AN INVERTED PENDULUM
Development of new control methods and the improvement of existing control techniques have been interest of researchers for many years. Inverted pendulum systems have been used to test the performance of various control...
Appraisal of Rainwater Harvesting in ASCOT Engineering Zabali Campus Baler Aurora
One of the problems encountered by the engineering students and faculty and staff members of Aurora State College of Technology (ASCOT) is the water supply for toilet and urinal flushing. This problem is attributed to th...