An Experimental Investigation of the Effects MQL Using Nanofluids on Surface Roughness of Hard Milling Process
Journal Title: Engineering and Technology Journal - Year 2024, Vol 9, Issue 05
Abstract
High cutting force and cutting heat are challenging problems that need to be overcome for the hard milling process. Minimum quantity lubrication (MQL) has been shown to be effective and suitable for use in hard milling due to the improving lubrication in the cutting zone. The content presented in this article is to investigate MQL using emulsion cutting oil with/without Al2O3 nanoparticles for hard milling of 60Si2Mn steel (50-52 HRC) using carbide tools. Factorial experimental design is used to evaluate the cooling condition, cutting speed and feed rate on surface roughness. Experimental results show that feed rate has the greatest influence on surface roughness among the parameters investigated, followed by cooling mode and cutting speed. MQL technique using nano cutting oil gives better machined surface quality than MQL using pure cutting oil, which has proven that the additives of Al2O3 nanoparticles to the base cutting oil has improved cooling and lubrication capability. Furthermore, the applicability of MQL method is expanded to apply for hard milling.
Authors and Affiliations
Tran Minh Duc, Tran The Long,
Keywords
Related Articles
- EP ID EP734691
- DOI 10.47191/etj/v9i05.03
- Views 48
- Downloads 1
ANALYSIS OF SSSS AND CSCS RECTANGULAR PLATES UNDER BOTH LATERAL AND IN-PLANE LOADS USING SPLIT DEFLECTION METHOD
This paper presents rectangular plate analysis under both lateral and in-plane loads using split deflection method. Thin rectangular plate with primary and secondary in-plane dimensions a and b and thickness t was analyz...
Saving the Use of Elpigi Gas in the Oven Machine (Calcination) Using the Energy Saving Mode Method at PT. ABC
Energy has become a basic need and as one of the main components in the industry, one of which is the ABC factory, one of the efforts to reduce production costs without affecting the results or quality of production is b...
TRANSVERSAL AND TECHNICAL COMPETENCY OF ENGINEERS WITH MASTERS’ DEGREE IN THE PHILIPPINES
This study intends to determine the set of transversal and technical competencies of Engineers with Masters’ Degree in the Philippines. Correlating with the set of competencies acquired, this study also aims to connect t...
The Effect of Corncob Composition and Torrefaction Temperature on the Calorific Value of Silk Tree Wood Pellets
This study presents the effect of corncob composition with torrefaction process treatment to obtain a calorific value to get the quality of wood pellets. This process was carried out by producing Silk Tree wood pellets u...
Design and Application of Duct Leak Detection Instrument in the Aircraft Pneumatic Systems
The pneumatic manifold system pipes on airplanes contain air with a pressure of approximately 45 psi and a temperature of approximately 117oC. This pipe stretches from the tip of the right wing to the tip of the left and...