An experimental-numerical analysis of plastic zones initiation around holes in shields made of steel C45 under tension
Journal Title: Archive of Mechanical Engineering - Year 2014, Vol 0, Issue 1
Abstract
The paper presents the results of research on the plastic zones formation in thin (3.51 [mm]) shields made of steel C45 with holes of 4, 10 and 20 diameters. The authorship method of identifying plastic macro-strains utilizing optical interference phenomenon was used in the experiments. The basic idea of the method is summarized below as being: “The occurrence of plastic deformations in the active process of loading is testified by a loss of the interference fringes that were previously present or by a clear and rapid change in their character”. In the experiments, the values of the stress initiating the first plastic deformation were determined. In order to explain the processes of plastic deformation appearance a detailed stress state analysis in the holes surrounding area was realized with the use of Finite Element Method. Comparison of experimental results with the results of FEM calculations indicates that there are significant quantitative as well as qualitative differences. Namely stresses initiating plastic deformations clearly exceed the value of ReH, and plastic deformation are of local plastic slides character. Similar results were previously obtained in studies on the shields made of steel 15CrMo with holes.
Authors and Affiliations
Henryk Jodłowski, Stefan Bućko, Marcin Trzebicki
Keywords
Related Articles
- EP ID EP168696
- DOI 10.2478/meceng-2014-0011
- Views 68
- Downloads 0
Influence of high pressure and high temperature hydrogen on fracture toughness of Ni-containing steels and alloys
The effect of hydrogen on short-term strength, low-cycle durability and planestress fracture toughness of 10Cr15Ni27 steel, 04Cr16Ni56 and 05Cr19Ni55 alloys at pressure up to 35 MPa and temperature 293. . . 773 K was inv...
An experimental-numerical analysis of plastic zones initiation around holes in shields made of steel C45 under tension
The paper presents the results of research on the plastic zones formation in thin (3.51 [mm]) shields made of steel C45 with holes of 4, 10 and 20 diameters. The authorship method of identifying plastic macro-strains uti...
Experimental study of the temperature distribution and microstructure of plunge stage in friction stir welding process by the tool with triangle pin
Considering the developing role of the friction stir welding in manufacturing industry, a complete study on the process is necessary. Studies on each stage of the process in particular, provide a better understanding of...
Effect of tool geometry and welding speed on mechanical properties and microstructure of friction stir welded joints of aluminium alloys AA6082-T6
Friction stir welding is a solid state innovative joining technique, widely being used for joining aluminium alloys in aerospace, marine automotive and many other applications of commercial importance. The welding parame...
Stack parameters effect on the performance of anharmonic resonator thermoacoustic heat engine
A thermoacoustic heat engine (TAHE) converts heat into acoustic power with no moving parts. It exhibits several advantages over traditional engines, such as simple design, stable functionality, and environment-friendly w...