An Optimization and Investigation of Mechanical Properties and Microstructures on Friction Stir Welding of Aluminium Alloys
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
Now a day for industrial applications and automotive industries, many are utilizing advanced welding technique is Friction stir welding process, offering more advantages are quality of the weld is good, consumption power is low so this process is taken for research work. This paper investigates mechanical properties of input parameters of welding speed, rotational speed, tilt angle, axial force and output parameters are tensile strength, micro hardnesson dissimilar welding of aluminium alloys using welding techniques on friction stir welding process based on cost taguchi L9 is used for carrying research and experiments trailing on parent materials on different ranges of input responses welding speed 60 mm/min., rotational speed 1350 rpm, tilt angle 30, axial force 11 KN with output responses tensile strength 183 Mpa and micro hardness 127 HV are measured with ASTM standards on specimens and analysis are carried out by using grey relational analysis, GRG method and microstructures development done to improve the empirical relations of process are automated and optimized.
Authors and Affiliations
Bazani Shaik Shaik, G. Harinath Gowd, B. Durga Prasad
Keywords
Related Articles
- EP ID EP463860
- DOI 10.24247/ijmperdfeb201922
- Views 65
- Downloads 0
Dynamic Stability of Plates Resting on Elastic Foundation
An accurate closed form solution to predict the dynamic stability behaviour of a square plate resting on an elastic foundation subjected to edge periodic loads, has been obtained. The Energy method is applied to solve th...
A UNIFIED APPROACH FOR GENERALIZED MINIMUM VARIANCE CONTROLLER FOR LINEAR TIME-VARYING SYSTEMS
We study single input and single output stochastic linear time-varying systems and develop a unified approach for generalized minimum variance controllers. The plant to be controlled is a time-varying controlled autoregr...
CFD Analysis of the Effect of Mach Number on Scramjet Combustion
Understanding the scramjet combustion and significant effect of each parameter is very much important for the design and analysis. The computational analysis has been carried out by using the commercial software FLUENT....
Mechanistic Modeling of Run out, Ovality and Misalignment in Reaming Process
Common process faults during reaming operations are runout, ovality and misalignment which leads to an increase in dynamic cutting forces during the reaming operation. This paper presents computation of cutting forces th...
The Integration of Lean Manufacturing and Lean Maintenance to Improve Production Efficiency
The lack of an implementation roadmap always deters companies from choosing lean manufacturing as its major management approach to achieve excellence; this paper proposes another improvement strategy to deliver manufactu...