An Optimization of Mechanical Properties of Friction Stir Welded Dissimilar Materials with Different Preheating Conditions
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
The aim of this work is to optimization of the mechanical properties of friction stir welded dissimilar materials with different preheating temperature. A series of joints were made on 04 mm thick Aluminum7xxx and Mild-Steel plates. The temperature used to be 100ºC, 150 ºC and 200 ºC. The welding operation performed with different rotational speeds and traverse speed (1000, 1400 and 2000 ramp and 16, 20 and 25 mm/min) the mechanical properties were measured with respect to tensile strength, impact strength and hardness. The physical properties were examined based on the microstructure using optical microscope. The results show that weld with 150 ºC, 16 mm/min and 1400 rpm parameter exhibit the better joint strength of 130.36 MPa.
Authors and Affiliations
Prashant S. Humnabad, M. S. Ganesha Prasad
Keywords
Related Articles
- EP ID EP464074
- DOI 10.24247/ijmperdfeb201950
- Views 65
- Downloads 0
Experimental Investigation of Exhaust Heat Recovery in Petrol Engine using Nano Enhanced PCM
About thirty percentage of the heat released during combustion process is carried away by the exhaust gas formed inside the internal combustion engine. This waste heat can be extracted through exhaust gas recirculation s...
Multi Response Objective Optimization of Friction Stir Welding Parameters of Dissimilar Metals of AA 6061 Aluminum and IS319 Brass Joining Through Taguchi’s Method
Dissimilar metals welding can be used where, combination of properties light weight and high strength was interested. Aluminium and Copper and its alloys are light metals have special properties, such as high electrical...
DESIGN AND ANALYSIS OF AIR PREHEATER
Air preheater is one of the accessories of steam generators, that works as a heat exchanger that utilizes the heat of the flue gas of the boiler, heating the air needed for the combustion of the fuel, thereby increasing...
MAGNANIMITY OF THERMAL POWER PRODUCTION ENGINEERING TECHNOLOGICAL BREAKTHROUGHS: AN EMPIRICAL ANALYSIS OF ADAPTATION TO CLIMATE CHANGE IN INDIA
In consideration of the practical fact, in terms of our long term needs and effects of thermal electric energy production, the Electric Energy-Water- Climate seasonal link makes it essential for adaptation to climate cha...
OPTIMISATION OF WIRE EDM PROCESS PARAMETERS ON D3 TOOL STEEL USING PRINCIPAL COMPONENT ANALYSIS
Wire electrical machining is an extremely potential electro thermal process that is use to machine material of any hardness, strength with very close tolerance. WEDM can also machine precise, complex and irregular shapes...