An Optimization of Process Parameters for Stir Casted Aluminium Metal Matrix Composites to Improve Material Removal Rate
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
The aim of this effort is to examine the development of stir casting on the aluminum metal matrix composite (MMC). The Taguchi L9 experimental technique is chosen to erect the quantities of machining tests. Abrasive Water Jet Machining is utilized to perform the machining on the stir casted aluminium MMCs. ANOVA analyzes the variety of process parameters and their property of the MMC for increasing Material Removal Rate (MRR). The result shows that the medium water pressure (2750 bar), average traverse speed (30 mm/min) and high abrasive flow rate (80 g/mm) are the influential process parameters to machining the aluminium metal matrix composites. The optimal values for SR are water pressure of 2300 bar, traverse speed of 25 mm/min and abrasive flow rate of 80 g/mm.
Authors and Affiliations
M. Shunmugasundaram, D Maneiah, Mangesh Lingampalle, Chetty Nagaraj, Prajwalkumar Patil
Keywords
Related Articles
- EP ID EP672300
- DOI 10.24247/ijmperdoct201984
- Views 112
- Downloads 0
Control of Boundary Layer Build-Up in an Impeller
The operation of the power producing engine is directly proportional to smooth and efficient compressor operation. The efficiency of an engine is directly related to the compression ratio of the compressor and expansion...
Experimental And Finite Element Analysis on the Mechanical Performance of Hybrid Fiber Reinforced Epoxy Composites
Fiber reinforced composites are the new age materials, which play a major role in the service sector and engineering field. These materials are tailor-made materials with a different volume fraction of resin and fibers,...
Modified Aluminosilicate Catalysts Based on Cenospheres of Power Plants for Processing Fuel Oil into Light Fractions
In this work the narrow fractions of non-perforated cenospheres from the combustion of Ekibastuz coal at the Almaty TPP-2 with an aluminosilicate module SiO2/Al2O3 = 3.2 and an iron content of 3.03-3.67 wt. % in Fe2O3 ha...
Characterization of Palmyra Fiber and Polyester Resins Composit
The global demand for wood as a building material is steadily growing, while the availability of this natural resource is diminishing. This situation has led to the development of alternative materials. Composites Some u...
Experimental Investigation on Properties of Surface Radiation of Solar Collector Receiver Tube Material with Black Nickel Coating
In this study, the characteristics of surface radiation heat transfer properties of stainless steel 304with Black Nickel coating is investigated with and without exposure of sunlight to measure the emissivity (€) and abs...