ANALISIS PERILAKU ALIRAN TERHADAP KINERJA RODA AIR ARUS BAWAH UNTUK PEMBANGKIT LISTRIK SKALA PIKOHIDRO
Journal Title: Dinamika Teknik Mesin - Year 2016, Vol 6, Issue 1
Abstract
Energy of water is one of the renewable energy that can be converted into electrical energy without pollution. Rotation, torque, and power generated by the water wheel can be used directly both for irrigation pumping and for running a rice mill even move the alternator and electrical generators. The purpose of this study was to find the best water wheel performance indicated by torque, rotation, and power as well as the relative speed of the water at the side of the blade. The results obtained in the preliminary test were the average water velocity of 2.50 m/s, the average rotation shaft of 79.78 rpm, the average torque on the shaft of 58.98 Nm, the average power of 510,67 W. The second results were also obtained as given the results and discussion section. It was found that the best water wheel performance based on the analysis was shown in the second test results.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP229333
- DOI -
- Views 68
- Downloads 0
Pengaruh variasi campuran bahan bakar tongkol jagung dan tempurung kelapa terhadap unjuk kerja tungku biomassa
Agricultural waste such as corn cobs and coconut shell can be used as alternative energy. Biomass as an alternative energy can be used as a fuel in the furnace. Corncob has low calorific value and density, so it is neces...
Pemanfaatan limbah piston bekas sebagai filler metal aluminium pada pengelasan oxy-acetylene
The abundance of waste piston used so far has not been utilized properly. Users of this piston waste can be used as an oxy-acetylene welder filler. Las oxy-acetylene has been widely used for welding on various types of a...
Pengaruh treatment terhadap peningkatan produktivitas industri mikro/kecil sasaran (export oriented product) dalam rangka peningkatan daya saing industri [studi kasus : di pulau lombok-ntb]
With the obtained value-indigo productivity on each SMEs, we can define improvement targets SMEs. By using reference values as a basis for selecting the smallest productivity of SMEs, then we can determine what we will i...
Perhitungan laju korosi dan perancangan sistem proteksi katodik anoda korban di lambung kapal tugboat Bontang o4 PT Badak NGL Bontang
Corrosion happens differently for each point of hull plate which caused of corrosion rate differences. So that is very important to measure it for each point, which is calculated using Weight Gain Loss Method. The measur...
ANALISIS SIFAT PENYERAPAN AIR DAN INDEKS NYALA API PADA PAPAN KOMPOSIT YANG DI PERKUAT SERAT DAUN PANDAN DURI DAN LIMBAH SERBUK GERGAJI KAYU SENGON DENGAN RESIN POLYESTER
The use of composite materials as an alternative to metallic materials in the field of engineering more widespread, not only as an interior daneksterior in the automotive field but also extended to other areas such as pr...